There are over 4346 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 1 | 2 | Motion Retrigger Time | 0 to 32767 (Default) |
Value = 0 will disable PIR sensor from triggering until motion timeout has finished. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 10 | 1 | Led Indicate Disable | 0 to 1 (Default) |
‘1’ – Enable Led Blink when device detects a motion event. ‘0’ – Disable Led Blink. This configuration is not affect inclusion, exclusion and reset. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 100 | 2 | Light Sensor Calibrated Coefficient | 1 to 32767 (Default) |
This configuration defines the calibrated scale for ambient light intensity. Because the method and position that the sensor mounted and the cover of sensor will bring measurement error, user can get more real light intensity by this parameter setting. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 11 | 1 | Led Color For Motion Event Report | 0 to 8 (Default) |
‘0’ – Disable. ‘1’ – Red. ‘2’ – Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 12 | 1 | Led Color For Temperature Sensor Report | 0 to 8 (Default) |
‘0’ – Disable. ‘1’ – Red. ‘2’ –Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 13 | 1 | Led Color For Light Sensor Report | 0 to 8 (Default) |
‘0’ – Disable. ‘1’ – Red. ‘2’ –Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 14 | 1 | Led Color For Battery Report | 0 to 8 (Default) |
‘0’ – Disable. ‘1’ – Red. ‘2’ –Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 15 | 1 | Led Color For Wakeup Notification Report | 0 to 8 (Default) |
‘0’ – Disable. ‘1’ – Red. ‘2’ –Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 2 | 2 | Motion Clear Time | 1 to 32767 (Default) |
Time to motion clear, the device will send a clear event report to controller and send BASIC_SET = 0x00 to nodes associated in group 2. Unit: Second. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 20 | 1 | Temperature Scale Setting | 0 to 1 (Default) |
0 – Celsius (C). 1 – Fahrenheit (F). | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 21 | 2 | Temperature Threshold Value to Report | 0 to 250 (Default) |
Scale is identical setting in Parameter No.20. Setting of value 20 can be a change of -2.0 or +2.0 (C or F depending on Parameter No.20) to induce automatic report or setting a value of 2 will be a change of 0.2(C or F). | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 22 | 2 | Light intensity Threshold Value to Report | 0 to 10000 (Default) |
Scale: Lux. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 23 | 2 | Temperature Sensor Report Interval | 1 to 32767 (Default) |
Unit: Second. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 24 | 2 | Light Sensor Report Interval | 1 to 32767 (Default) |
Unit: Second. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 3 | 1 | Motion Sensitivity | 0 to 11 (Default) |
0 – PIR sensor disabled. 1 – Lowest sensitivity. 11 – Highest sensitivity. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 30 | 2 | Temperature Offset Value | -200 to 200 (Default) |
Temperature Offset Value = [Value] * 0.1(Celsius / Fahrenheit) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 31 | 2 | Light Intensity Offset Value | -1000 to 1000 (Default) |
Scale: Lux. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 4 | 1 | Binary Sensor Report Enable | 0 to 1 (Default) |
‘0’ –Disable sensor binary report when motion event is detected or cleared. ‘1’ –Enable sensor binary report when motion event is detected or cleared. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 5 | 1 | Disable BASIC_SET to Associated nodes | 0 to 3 (Default) |
0 – Disabled All Group Basic Set Command 1 – Enabled Group 2 Basic Set Command, Group 3 Basic Set Command is disabled. 2 – Enabled Group 3 Basic Set Command, Group 2 Basic Set Command is disabled. 3 – Enabled Group 2 and Group 3 Basic Set Command. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 6 | 1 | Basic Set Value Settings for Group 2 | 0 to 5 (Default) |
‘0’ – Send BASIC_SET = 0xFF to devices associated in Group 2 when motion event is triggered, send BASIC_SET = 0x00 to devices associated in group 2 when motion event is cleared. ‘1’– Send BASIC_SET = 0x00 to devices associated in Group 2 when motion event is triggered, send BASIC_SET = 0xFF to devices associated in group 2 when motion event is cleared. ‘2’ – Send BASIC_SET = 0xFF to devices associated in Group 2 when motion event is triggered. ‘3’ – Send BASIC_SET = 0x00 to devices associated in Group 2 when motion event is triggered. ‘4’ – Send BASIC_SET = 0x00 to devices associated in Group 2 when motion event is cleared. ‘5’ – Send BASIC_SET = 0xFF to devices associated in Group 2 when motion event is cleared. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 7 | 2 | Temperature Alarm Value | -400 to 850 (Default) |
Value = [Value] × 0.1(Celsius / Fahrenheit) | |