There are over 4408 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
11 | 1 | Power reporting | 0 | power reports inactive | |
1 to 100 (Default) |
power change in percent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
12 | 2 | Energy reporting threshold | 0 | energy reports inactive | |
1 to 500 (Default) |
(0.01-5kWh, step 0.01kWh) - threshold | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
13 | 2 | Periodic power reporting | 0 | periodic reports inactive | |
30 to 32400 (Default) |
(in seconds) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
14 | 2 | Periodic energy reporting | 0 | periodic reports inactive | |
30 to 32400 (Default) |
(in seconds) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
15 | 1 | Measuring energy consumed by the Wall Plug itself | 0 (Default) |
function inactive | |
1 | function active | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
2 | 1 | Remember device status before the power failure | 0 | device remains switched off | |
1 (Default) |
device restores the state from before the power failure | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
21 | 2 | UP value - „On/Off (Power)” association group (3) | 100 to 18000 (Default) |
(10.0-1800.0W, step 0.1W) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
22 | 2 | DOWN value - „On/Off (Power)” association group (3) | 0 to 17900 (Default) |
(0.0-1790.0W, step 0.1W) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
23 | 1 | Controlling „On/Off (Power)” association group (3) | 1 | send frame (with value set in parameter 26) only if power exceeded value of parameter 21 | |
2 | send frame (with value set in parameter 27) only if power dropped below value of parameter 22 | ||||
3 (Default) |
send frame in both cases | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
24 | 2 | SWITCH ON value - „On/Off (Button)” association group (2) | 0 | turning off associated devices | |
1 to 99 | forcing level of associated devices | ||||
255 (Default) |
setting associated devices to the last remembered state or turning them on | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
25 | 1 | SWITCH OFF value - „On/Off (Button)” association group (2) | 0 (Default) |
turning off associated devices | |
1 to 99 | forcing level of associated devices | ||||
255 | setting associated devices to the last remembered state or turning them on | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
26 | 2 | THRESHOLD UP value - „On/Off (Power)” association group (3) | 0 | turning off associated devices | |
1 to 99 | forcing level of associated devices | ||||
255 (Default) |
setting associated devices to the last remembered state or turning them on | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
27 | 2 | THRESHOLD DOWN value - „On/Off (Power)” association group (3) | 0 (Default) |
turning off associated devices | |
1 to 99 | forcing level of associated devices | ||||
255 | setting associated devices to the last remembered state or turning them on | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
3 | 2 | Overload safety switch | 0 (Default) |
function inactive | |
10 to 18000 | 1.0-1800.0W, step 0.1W) - power threshold | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
30 | 1 | Active alarms | 1 | general alarm | |
2 | smoke alarm | ||||
4 | CO alarm | ||||
8 | CO2 alarm | ||||
16 | high temperature alarm | ||||
32 | flood alarm | ||||
64 | all | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
31 | 1 | Response to alarm frames | 0 (Default) |
no reaction | |
1 | turn connected device on | ||||
2 | turn connected device off | ||||
5 to 50 | (0.5-5.0s, step 0.1s) - cyclically change device state with set period | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
32 | 2 | Alarm state duration | 1 to 32400 (Default) |
(in seconds) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
40 | 2 | Power load for violet color | 1000 to 18000 (Default) |
(100.0-1800.0W, step 0.1W) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
41 | 1 | LED frame color when controlled device is on | 0 | illumination turned off completely | |
1 (Default) |
color changes smoothly depending on active power | ||||
2 | color changes in steps depending on active power | ||||
3 | white | ||||
4 | red | ||||
5 | green | ||||
6 | blue | ||||
7 | yellow | ||||
8 | cyan | ||||
9 | magenta | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
42 | 1 | LED frame color when controlled device is off | 0 (Default) |
illumination turned off completely | |
1 | LED frame is illuminated with a color corresponding to the last measured power, before the controlled device was turned off | ||||
3 | white | ||||
4 | red | ||||
5 | green | ||||
6 | blue | ||||
7 | yellow | ||||
8 | cyan | ||||
9 | magenta | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
43 | 1 | LED frame color at the Z-Wave network alarm detection | 0 | illumination turned off completely | |
1 | no change in color. LED frame color is determined by settings of parameters 41 or 42 | ||||
2 (Default) |
LED frame flashes red/blue/white | ||||
3 | white | ||||
4 | red | ||||
5 | green | ||||
6 | blue | ||||
7 | yellow | ||||
8 | cyan | ||||
9 | magenta | ||||