TThere are thousands of interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
13 | 1 | Sets LED indicator mode of operation | 0=Fan Controller LED acts like a Fan Controller 1=Fan Controller LED acts like a status indicator (LEDs should display the current fan speed level when you tap the paddle) | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 1 | No | No | No |
From |
To |
Description |
|||
0 | 1 | 0=Fan Controller LED acts like a Fan Controller 1=Fan Controller LED acts like a status indicator (LEDs should display the current fan speed level when you tap the paddle) | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
14 | 1 | Sets the Normal mode LED color | Sets the default LED color when the Fan Controller is NOT in status mode. All LEDS will use this color in this mode. The color values are: 0=White 1=Red 2=Green 3=Blue 4=Magenta 5=Yellow 6=Cyan | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 6 | No | No | No |
From |
To |
Description |
|||
0 | 6 | Sets the default LED color when the Fan Controller is NOT in status mode. All LEDS will use this color in this mode. The color values are: 0=White 1=Red 2=Green 3=Blue 4=Magenta 5=Yellow 6=Cyan | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
21 | 1 | Sets status mode LED 1 bottom color | Sets status mode LED 1 bottom color 0=Off 1=Red 2=Green 3=Blue 4=Magenta 5=Yellow 6=Cyan 7=White | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 7 | No | No | No |
From |
To |
Description |
|||
0 | 7 | Sets status mode LED 1 bottom color 0=Off 1=Red 2=Green 3=Blue 4=Magenta 5=Yellow 6=Cyan 7=White | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
22 | 1 | Sets status mode LED 2 color | Sets status mode LED 2 color 0=Off 1=Red 2=Green 3=Blue 4=Magenta 5=Yellow 6=Cyan 7=White | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 7 | No | No | No |
From |
To |
Description |
|||
0 | 7 | Sets status mode LED 2 color 0=Off 1=Red 2=Green 3=Blue 4=Magenta 5=Yellow 6=Cyan 7=White | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
23 | 1 | Sets status mode LED 3 color | Sets status mode LED 3 color 0=Off 1=Red 2=Green 3=Blue 4=Magenta 5=Yellow 6=Cyan 7=White | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 7 | No | No | No |
From |
To |
Description |
|||
0 | 7 | Sets status mode LED 3 color 0=Off 1=Red 2=Green 3=Blue 4=Magenta 5=Yellow 6=Cyan 7=White | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
24 | 1 | Sets status mode LED 4 color | Sets status mode LED 4 color 0=Off 1=Red 2=Green 3=Blue 4=Magenta 5=Yellow 6=Cyan 7=White | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 7 | No | No | No |
From |
To |
Description |
|||
0 | 7 | Sets status mode LED 4 color 0=Off 1=Red 2=Green 3=Blue 4=Magenta 5=Yellow 6=Cyan 7=White | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
3 | 1 | Nightlight Mode | Nightlight Mode, sets bottom LED operation (in normal mode). 0= bottom LED on if load is off. 1= off if load is off | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
1 | 0 | 1 | No | No | No |
From |
To |
Description |
|||
0 | 1 | 0= bottom LED on if load is off. 1= off if load is off | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
30 | 1 | Sets the Blink frequency for All LEDs in Status mode | Sets the Blink frequency for All LEDs in Status mode Possible values: 0-255 0= No blink, 1=100ms (100 ms off then 100ms on) | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 255 | No | No | No |
From |
To |
Description |
|||
0 | 255 | 0= No blink, 1=100ms (100 ms off then 100ms on) | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
31 | 1 | Sets LEDs 1-4 to Blink in Status mode | Bitmask defines specific LEDs to enable for blinking. Note: this decimal value is derived from a hex code calculation based on the following: 0x01 = led 1 0x02 = led 2 0x04 = led 3 0x08 = led 4 0 = All LED's disabled 1 = LED 1 2 = LED 2 3 = LED 1 and 2 4 = LED 3 5 = LED 3 and 1 6 = LED 3 and 2 7 = LED 3 and 2 and 1 8 = LED 4 9 = LED 4 and 1 10 = LED 4 and 2 11 = LED 4 and 2 and 1 12 = LED 4 and 3 13 = LED 4 and 3 and 1 14 = LED 4 and 3 and 2 15 = LED 4 and 3 and 2 and 1 | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 15 | No | No | No |
From |
To |
Description |
|||
0 | 15 | 0 = All LEDs disabled 1 = LED 1 2 = LED 2 3 = LED 1 and 2 4 = LED 3 5 = LED 3 and 1 6 = LED 3 and 2 7 = LED 3 and 2 and 1 8 = LED 4 9 = LED 4 and 1 10 = LED 4 and 2 11 = LED 4 and 2 and 1 12 = LED 4 and 3 13 = LED 4 and 3 and 1 14 = LED 4 and 3 and 2 15 = LED 4 and 3 and 2 and 1 | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
4 | 1 | Sets paddles load orientation | Sets whether the top or the bottom paddle turns the load ON | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 1 | No | No | No |
From |
To |
Description |
|||
0 | 1 | 0 = Top On 1 = Bottom On | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
5 | 1 | Sets fan type | Sets the supported fan type, 3 or 4 speed | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 1 | No | No | No |
From |
To |
Description |
|||
0 | 1 | 0=3 speed fan 1=4 speed fan | |||