There are over 4408 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 40 | 1 | Reporting Watts on power change | • Default value 10 • 0 – reporting disabled • 1-100 = 1% - 100% reporting enabled. Power is reported only when actual power in Watts (in real time changes for more than set percentage comparing to previous actual power in Watts, step is 1%. NOTE: when power is changed for more than percent value in this parameter -> the device is reporting also: • A (Current) (if the value has changed) • V (Voltage) (if the value has changed) • Power Factor (if the value has changed) • kvar (Reactive power) (if the value has changed) • kWh (Energy – Active power accumulated Import) (if the value has changed) • kWh (Energy – Active power accumulated Export) (if the value has changed) • kVAh (Energy – Apparent power accumulated) (if the value has changed) • kvarh (Energy – Reactive power accumulated) (if the value has changed) To avoid unintended reporting (electric disturbances, noise, etc..) the measured power less than 5W is not reported. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 10 | 0 | 100 | No | No | No |
From |
To |
Description |
|||
| 0 | 0 | reporting disabled | |||
| 1 | 100 | 1% - 100% reporting enabled. Power is reported only when actual power in Watts (in real time changes for more than set percentage comparing to previous actual power in Watts, step is 1%. | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 42 | 2 | Reporting on time interval | • Default value 600 (10 minutes) • 0-599 = reporting disabled • 600 - 32535 = 600 seconds - 32535 seconds. Reporting enabled. Report is send with the time interval set by entered value. NOTE: The device is reporting the following values: • W (Active Power) (if the value has changed) • A (Current) (if the value has changed) • V (Voltage) (if the value has changed) • Power Factor (if the value has changed) • kvar (Reactive power) (if the value has changed) • kWh (Energy – Active power accumulated Import) (if the value has changed) • kWh (Energy – Active power accumulated Export) (if the value has changed) • kVAh (Energy – Apparent power accumulated) (if the value has changed) • kvarh (Energy – Reactive power accumulated) (if the value has changed) | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 600 | 0 | 32535 | No | No | No |
From |
To |
Description |
|||
| 0 | 599 | reporting disabled | |||
| 600 | 32532 | Reporting enabled. Report is send with the time interval set by entered value. | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 45 | 1 | Reset Power counters | • Default value 0 • 0 – no function • 1 – reset counter 1 –kWh import • 2 – reset counter 2 – kvarh • 4 – reset counter 3 – kVAh • 8 – reset counter 4 – kWh export • 15 – reset ALL counters | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 15 | No | No | No |
From |
To |
Description |
|||
| 0 | 0 | no function | |||
| 1 | 1 | reset counter 1 –kWh import | |||
| 2 | 2 | reset counter 2 – kvarh | |||
| 4 | 4 | reset counter 3 – kVAh | |||
| 8 | 8 | reset counter 4 – kWh export | |||
| 15 | 15 | reset ALL counters | |||