There are over 4409 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 1 | 1 | Enable/disable the touch sound. | 0 | Disable | |
| 1 (Default) |
Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 11 | 1 | To set which Command would be sent to the associated nodes in association group 2, 4, 6, 8. | 0 (Default) |
Baisc Set | |
| 1 | Switch Binary Set | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 2 | 1 | Enable/disable the touch vibration. | 0 (Default) |
Disable | |
| 1 | Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 252 | 1 | Enable/disable to lock all configuration parameters. | 0 (Default) |
Disable | |
| 1 | Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 255 | 4 | Reset the Mote | 0 (Default) |
Reset all configuration parameters to factory default setting | |
| 1431655765 | Reset to factory default setting and removed from the z-wave network | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 3 | 1 | Enable/disable the function of button slide. | 0 | Disable | |
| 1 (Default) |
Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 39 | 1 | Set the low battery value. | 5 to 50 (Default) |
The value range is 5% to 50%. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 4 | 1 | To configure which report will be sent when pressing the buttons. | 1 (Default) |
Send Central Scene Command Notification | |
| 3 | Send Central Scene Command Notification and Configuration report | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 81 | 1 | Enable/ disable to blink the orange Led when WallMote sends out Wake Up Notification | 0 (Default) |
Disable | |
| 1 | Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 82 | 1 | Enable/ disable to blink the blue Led (or yellow Led if low battery) for 3 seconds before it changes to red when the button control message is failed to be sent out. | 0 | Disable | |
| 1 (Default) |
Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 83 | 1 | Enable/ disable to light ON the orange Led when WallMote is in USB charging. | 0 | Disable, the orange LED will blink 3 times and then be OFF once the WallMote is USB powered on. | |
| 1 (Default) |
Enable. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 84 | 1 | Enable/ disable the Led indication when pressing the control buttons | 0 | Disable | |
| 1 (Default) |
Enable | ||||