There are over 4409 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 1 | 1 | Reverse open/close detection | This parameter allows you to reverse the detection values of the device. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 1 | No | No | Yes |
From |
To |
Description |
|||
| 0 | 0 | (Default) Disabled | |||
| 1 | 1 | Reverse event (Open 16, Close 17) | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 19 | 1 | Alternate exclusion | This parameter allows you to enable the alternate exclusion method that is available for this device. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 1 | No | No | No |
From |
To |
Description |
|||
| 0 | 0 | (Default) Disabled | |||
| 1 | 1 | Enabled | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 20 | 1 | Inclusion Configuration | This parameter allows you to change the inclusion configuration settings of this device. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 1 | 2 | No | No | No |
From |
To |
Description |
|||
| 1 | 1 | (Default) - Notification Only | |||
| 2 | 2 | Notification and Basic Report | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 21 | 1 | LED Control (Magnet triggers only) | This parameter gives you the option to turn the LED off on magnetic triggers. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 1 | No | No | No |
From |
To |
Description |
|||
| 0 | 0 | (Default) - Enabled | |||
| 1 | 1 | Disabled | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 23 | 2 | Battery Report Interval | This parameter allows you to choose how often the battery level is reported. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1440 | 5 | 1440 | No | No | No |
From |
To |
Description |
|||
| 5 | 60 | 5-60 Minutes | |||
| 360 | 360 | 6 Hours | |||
| 720 | 720 | 12 Hours | |||
| 1440 | 1440 | (Default) Daily | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 53 | 1 | Tamper LED Control | This parameter allows you to choose how often the LED will flash once the device/battery cover is tampered with. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 1 | 2 | No | No | No |
From |
To |
Description |
|||
| 1 | 1 | (Default) Continuous Flash | |||
| 2 | 2 | Flashes once, on initial tamper only | |||