There are over 4220 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 1 | 1 | On/Off Status Recovery A er Power Failure | 0 (Default) |
Double Plug remembers the status for each outlet prior to power outage and turns back to it | |
| 1 | Double Plug automatically turns ON for each outlet once power is restored (it does not remember the status prior to power outage) | ||||
| 2 | Double Plug automatically turns OFF each outlet once power is restored (it does not remember the status prior to power outage) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 10 | 1 | Enable / Disable Auto Turn-On Timer for CH1 | 0 (Default) |
timer disabled | |
| 1 | timer enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 11 | 1 | Set Auto Turn-On Timer for CH1 | 1 to 65535 (Default) |
minutes | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 12 | 1 | Enable / Disable Auto Turn-Off Timer for CH2 | 0 (Default) |
timer disabled | |
| 1 | timer enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 13 | 4 | Set Auto Turn-Off Timer for CH2 | 1 to 65535 (Default) |
minutes | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 14 | 1 | Enable / Disable Auto Turn-On Timer for CH2 | 0 (Default) |
timer disabled | |
| 1 | timer disabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 15 | 4 | Set Auto Turn-On Timer for CH2 | 1 to 65535 (Default) |
minutes | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 16 | 1 | Manual Control | 0 | manual control disabled for both outlets | |
| 1 (Default) |
manual control enabled for both outlets | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 17 | 1 | LED Indicator Mode | 0 | LED indicator will display power consumption whenever the device is plugged in (LED stays on at all times, even if the plug is off) | |
| 1 (Default) |
LED indicator will display power consumption whenever the device is ON in and will turn off when the plug is OFF | ||||
| 2 | LED indicator will display the level of power consumption for 5 seconds only whenever the device is turned on or off (LED indicator will stay off for most of the time) | ||||
| 3 | LED indicator is OFF at all times except for inclusion, exclusion, and Z-Wave range test. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 2 | 4 | Power Wattage Report Value Threshold | 0 | disabled (Double Plug will not report power consumption based on this setting). | |
| 1 to 65535 (Default) |
number of Watts the appliance needs to go over for the change to be reported | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 3 | 4 | Power Wattage Report Frequency | 30 to 2678400 (Default) |
interval for power consumption reports in seconds | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 4 | 4 | Energy (kWh) Report Frequency | 5 to 2678400 (Default) |
interval for energy (kwh) reports in seconds | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 5 | 4 | Voltage (V) Report Frequency | 5 to 2678400 (Default) |
interval for voltage (V) reports in seconds | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 6 | 4 | Electrical Current (A) Report Frequency | 5 to 2678400 (Default) |
interval for electrical current (A) reports in seconds | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 7 | 1 | Overload Protection | 1 to 10 (Default) |
number of Amps | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 8 | 1 | Enable / Disable Auto Turn-Off Timer for CH1 | 0 (Default) |
timer disabled | |
| 1 | timer enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 9 | 4 | Set Auto Turn-Off Timer for CH1 | 1 to 65535 (Default) |
minutes | |