There are over 4377 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 1 | 2 | Motion Retrigger Time | 0 to 32767 (Default) |
Value = 0 will disable PIR sensor from triggering until motion timeout has finished. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 10 | 1 | Led Indicate Disable | 0 to 1 (Default) |
‘1’ – Enable Led Blink when device detects a motion event. ‘0’ – Disable Led Blink. This configuration is not affect inclusion, exclusion and reset. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 100 | 2 | Light Sensor Calibrated Coefficient | 1 to 32767 (Default) |
Scale: Lux. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 11 | 1 | Led Color For Motion Event Report ‘0’ – Disable. | 0 to 8 (Default) |
‘0’ – Disable. ‘1’ – Red. ‘2’ – Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 12 | 1 | Led Color For Temperature Sensor Report | 0 to 8 (Default) |
‘0’ – Disable. ‘1’ – Red. ‘2’ – Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 13 | 1 | Led Color For Light Sensor Report | 0 to 8 (Default) |
‘0’ – Disable. ‘1’ – Red. ‘2’ –Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 15 | 1 | Led Color For Wakeup Notification Report | 0 to 8 (Default) |
‘0’ – Disable. ‘1’ – Red. ‘2’ –Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 2 | 2 | Motion Clear Time | 1 to 32767 (Default) |
Unit: Second. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 20 | 1 | Temperature Scale Setting | 0 to 8 (Default) |
‘0’ – Disable. ‘1’ – Red. ‘2’ –Green. ‘3’ – Blue. ‘4’ – Yellow. ‘5’ – Pink. ‘6’ – Cyan. ‘7’ – Purple. ‘8’ – Orange. | |
| 0 to 1 (Default) |
0 – Celsius (C). 1 – Fahrenheit (F). | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 21 | 2 | Temperature Threshold Value to Report | 0 to 250 (Default) |
Temperature Threshold Value | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 22 | 2 | Light intensity Threshold Value to Report | 0 to 10000 (Default) |
Scale: Lux. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 23 | 2 | Temperature Sensor Report Interval | 1 to 32767 (Default) |
Unit: Second. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 24 | 2 | Light Sensor Report Interval | 1 to 32767 (Default) |
Unit: Second. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 3 | 1 | Motion Sensitivity | 0 to 11 (Default) |
0 – PIR sensor disabled. 1 – Lowest sensitivity. 11– Highest sensitivity. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 30 | 2 | Temperature Offset Value | -200 to 200 (Default) |
Temperature Offset Value = [Value] * 0.1(Celsius / Fahrenheit) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 31 | 2 | Light Intensity Offset Value | -1000 to 1000 (Default) |
Scale: Lux. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 4 | 1 | Binary Sensor Report Enable | 0 to 1 (Default) |
‘0’ –Disable sensor binary report when motion event is detected or cleared. ‘1’ –Enable sensor binary report when motion event is detected or cleared. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 5 | 1 | Disable BASIC_SET to Associated nodes | 0 to 3 (Default) |
0 – Disabled All Group Basic Set Command 1 – Enabled Group 2 Basic Set Command, Group 3 Basic Set Command is disabled. 2 – Enabled Group 3 Basic Set Command, Group 2 Basic Set Command is disabled. 3 – Enabled Group 2 and Group 3 Basic Set Command. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 6 | 1 | Basic Set Value Settings for Group 2 | 0 to 5 (Default) |
‘0’ – Send BASIC_SET = 0xFF to devices associated in Group 2 when motion event is triggered, send BASIC_SET = 0x00 to devices associated in group 2 when motion event is cleared. ‘1’– Send BASIC_SET = 0x00 to devices associated in Group 2 when motion event is triggered, send BASIC_SET = 0xFF to devices associated in group 2 when motion event is cleared. ‘2’ – Send BASIC_SET = 0xFF to devices associated in Group 2 when motion event is triggered. ‘3’ – Send BASIC_SET = 0x00 to devices associated in Group 2 when motion event is triggered. ‘4’ – Send BASIC_SET = 0x00 to devices associated in Group 2 when motion event is cleared. ‘5’ – Send BASIC_SET = 0xFF to devices associated in Group 2 when motion event is cleared. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 7 | 2 | Temperature Alarm Value | -400 to 850 (Default) |
Value = [Value] * 0.1(Celsius / Fahrenheit) | |