There are over 4377 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 150 | 1 | Force calibration | 0 (Default) |
device is not calibrated | |
| 1 | device is calibrated | ||||
| 2 | force device calibration | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 151 | 1 | Operating mode | 1 (Default) |
roller blind (with positioning) | |
| 2 | Venetian blind (with positioning) | ||||
| 3 | gate (without positioning) | ||||
| 4 | gate (with positioning) | ||||
| 5 | roller blind with built-in driver | ||||
| 6 | roller blind with built-in driver (impulse) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 152 | 4 | Venetian blind - time of full turn of the slats | 0 to 965535 (Default) |
time of turn | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 153 | 1 | Set slats back to previous position | 0 | slats return to previously set position only in case of the main controller operation. | |
| 1 (Default) |
slats return to previously set position in case of the main controller operation, momentary switch operation, or when the limit switch is reached. | ||||
| 2 | slats return to previously set position in case of the main controller operation, momentary switch operation, when the limit switch is reached or after receiving the Switch Multilevel Stop control frame | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 154 | 2 | Delay motor stop after reaching end switch | 0 to 255 (Default) |
time | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 155 | 2 | Motor operation detection | 0 | reaching a limit switch will not be detected | |
| 1 to 255 (Default) |
report interval | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 156 | 4 | Time of up movement | 1 to 65535 (Default) |
(0.01 - 655.35s, every 0.01s) - movement time | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 157 | 4 | Time of down movement | 1 to 65535 (Default) |
(0.01 - 655.35s, every 0.01s) - movement time | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 20 | 1 | Switch type | 0 | momentary switches | |
| 1 | toggle switches | ||||
| 2 (Default) |
single, momentary switch (the switch should be connected to S1 terminal) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 24 | 1 | Inputs orientation | 0 (Default) |
default (S1 - 1st channel, S2 - 2nd channel) | |
| 1 | reversed (S1 - 2nd channel, S2 - 1st channel) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 25 | 1 | Outputs orientation | 0 (Default) |
default (Q1 - 1st channel, Q2 - 2nd channel) | |
| 1 | reversed (Q1 - 2nd channel, Q2 - 1st channel) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 30 | 4 | Alarm configuration - 1st slot | 1 | Notification Type | |
| 2 | Notification Status | ||||
| 3 | Event/State Parameters | ||||
| 4 | action: 0- no action, 1-open blinds, 2-close blinds | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 31 | 4 | Alarm configuration - 2nd slot (Water) | 1 | Notification Type | |
| 2 | Notification Status | ||||
| 3 | Event/State Parameters | ||||
| 4 | action: 0- no action, 1-open blinds, 2-close blinds | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 32 | 4 | Alarm configuration - 3rd slot (Smoke) | 1 | Notification Type | |
| 2 | Notification Status | ||||
| 3 | Event/State Parameters | ||||
| 4 | action: 0- no action, 1-open blinds, 2-close blinds | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 33 | 4 | Alarm configuration - 4th slot (CO) | 1 | Notification Type | |
| 2 | Notification Status | ||||
| 3 | Event/State Parameters | ||||
| 4 | action: 0- no action, 1-open blinds, 2-close blinds | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 34 | 4 | Alarm configuration - 5th slot (Heat) | 1 | Notification Type | |
| 2 | Notification Status | ||||
| 3 | Event/State Parameters | ||||
| 4 | action: 0- no action, 1-open blinds, 2-close blinds | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 40 | 1 | S1 switch - scenes sent | 1 | Key pressed 1 time | |
| 2 | Key pressed 2 times | ||||
| 4 | Key pressed 3 times | ||||
| 8 | Key hold down and key released | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 41 | 1 | S2 switch - scenes sent | 1 | Key pressed 1 time | |
| 2 | Key pressed 2 times | ||||
| 4 | Key pressed 3 times | ||||
| 8 | Key hold down and key released | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 60 | 1 | Measuring power consumed by the device itself | 0 (Default) |
function inactive | |
| 1 | function active | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 61 | 2 | Power reports - on change | 0 | reports are disabled | |
| 1 to 500 (Default) |
change in power | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 62 | 2 | Power reports - periodic | 0 | periodic reports are disabled | |
| 30 to 32400 (Default) |
report interval | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 65 | 2 | Energy reports - on change | 0 | reports are disabled | |
| 1 to 500 (Default) |
change in energy | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 66 | 2 | Energy reports - periodic | 0 | periodic reports are disabled | |
| 30 to 32400 (Default) |
report interval | ||||