TThere are thousands of interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 10 | 1 | Low Battery Power Level Low battery power level of alarm threshold values | 0 to 50 (Default) |
Low battery power level of alarm threshold values | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 13 | 2 | Setup the wait time of PIR for clear the motion. | 5 to 15300 (Default) |
Setup the wait time of PIR for clear the motion. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 14 | 1 | When the Motion Sensor is triggered, if this parameter is 0x01 then it will send Basic set command to group 1. | 0 to 1 (Default) |
When the Motion Sensor is triggered, if this parameter is 0x01 then it will send Basic set command to group 1. | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 15 | 1 | PIR triggers the correspondence between the value of the Basic set and the PIR state. | 0 (Default) |
PIR triggers send the basic set with 0xFF, PIR alarm release send the basic set with 0x00. | |
| 1 | PIR triggers send the basic set with 0x00, PIR alarm release send the basic set with 0xFF. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 16 | 1 | PIR triggers the correspondence between the value of the Basic set and the PIR stateMotion detection sensitivity level is a value between 1 and 10. | 0 to 10 (Default) |
Motion detection sensitivity level is a value between 1 and 10. 1 = Lowest Motion Sensitivity, 10 = Highest Motion Sensitivity | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 17 | 1 | Enable/disable pet immunity mode. | 0 to 1 (Default) |
Enable/disable pet immunity mode.0 = Disable the pet immunity mode,1 = Enable the pet immunity mode | |