Home

Z-Wave Products

There are thousands of interoperable Z-Wave products throughout the world, and over 94 million Z-Wave products have been sold since our beginnings in 2001. All of them work together regardless of brand, because they're all based on the common Z-Wave standard. Browse our Product Finder to see what Z-Wave can do for you.

Product details

Home \ \

« Back to Listing

Thermostat

Brand Name: RCS

Product Identifier: TBZ500

Product Version: HW: 1 FW: 1.00:02.16

Z-Wave Certification Number: ZC10-19076651

Z-Wave Certification Date: 7/2/2019

Use In: U.S. / Canada / Mexico

Z-Wave Protocol Implementation Conformance Statement: View Download

The TBZ500 Z-Wave Plus Thermostat is a programmable, Z-Wave communicating thermostat. It can be powered using 24VAC, or using four (4) AA batteries. Using Z-Wave technology, end users have the ability to use most compatible Z-Wave hubs/controllers to operate and animate the thermostat, configure programming settings, as well as to display current conditions in the home or office.

Product Features: View Features

Additional Special Features:

Test Mode - shortens the system built-in delays (like
MOT and MRT)
Aux Heat Enable (Heat Pump Systems only) - Enables the auxiliary heat operation.
2nd Stage Heat Enable - Enables the second stage heat operation
2nd Stage Cool Enable - Enables the second stage cool operation
Minimum run time - Sets the Minimum Run Time (MRT) delay before a heating/cooling cycle can turn off. Prevents rapid on/off cycling.
Minimum Off Time - Sets the Minimum Off Time (MOT) delay before
another heating/cooling cycle can begin. Provides
compressor short cycle protection. “Wait” is displayed
on screen when active.
Heat Setpoint Max. - Sets the maximum heating setpoint value.
Will not ramp or accept setpoints higher than this maximum
Cool Setpoint Min. - Sets the maximum heating setpoint value
Heat Blower Off Delay - Sets the system blower delay off time after a heat call ends (fan purge)
Cool Blower Off Delay - Sets the system blower delay off time after a cool call ends (fan purge)
Heat - Cool Delta - Sets the minimum separation between heating
and cooling setpoints.
Heating Stage 1 on Threshold - Sets the delta from setpoint that stage 1 heating starts.
Heating Stage 1 Off Threshold - Sets the delta from setpoint that stage 1 heating stops.
Heating Stage 2 On Threshold - Sets the delta from setpoint that stage 2 heating starts.
Heating Stage 2 Off Threshold - Sets the delay from setpoint that stage 2 heating stops.
Aux Heat On Threshold - Sets the delta from setpoint that stage 3 heating starts.
Aux Heat Off Threshold - Sets the delta from setpoint that stage 3 heating stops.
Cooling Stage 1 On Threshold - Sets the delta from setpoint that stage 1 cooling starts.
Cooling Stage 1 Off Threshold - Sets the delta from setpoint that stage 1 cooling stops.
Cooling Stage 2 On Threshold - Sets the delta from setpoint that stage 2 cooling starts.
Cooling Stage 2 Off Threshold - Sets the delta from setpoint that stage 2 cooling stops.
Restore Defaults - Restores all settings to factory defaults.

Z-Wave Plus Version: 1

SmartStart Compatible: No

Manufacturer Provided Product Manual: Download

Association Capabilities: View Associations

Configuration Capabilities: View Configuration Parameters

Z-Wave hardware platform: ZM5202

Z-Wave version: 6.51.06

Z-Wave library type: Routing Slave

Z-Wave Device Type: Thermostat - HVAC

Z-Wave Role Type: Listening Sleeping Slave

Product Type ID: 0x5442

Product ID: 0x543A

Network Management Instructions: View Network Management Info

Command Classes: View Command Classes

Associated Categories: Thermostats

This Brand: See other products of this brand

Download Product Data in XML Format: Download

Z-Wave Products

Product details

Thermostat

See also: