There are over 4400 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
1 | 2 | Motion detection - sensitivity | 8 to 255 (Default) |
sensitivity | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
12 | 1 | BASIC command class configuration | 0 (Default) |
BASIC ON and OFF command frames sent in Basic Command Class | |
1 | only the BASIC ON command frame sent in Basic Command Class | ||||
2 | only the BASIC OFF command frame sent in Basic Command Class | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
14 | 2 | BASIC ON command frame value | 0 to 255 (Default) |
BASIC ON | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
16 | 2 | BASIC OFF command frame value | 0 to 255 (Default) |
BASIC OFF | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
18 | 1 | Associations in Z-Wave network Security Mode | 0 | none of the groups sent as secure | |
1 | 2nd group sent as secure | ||||
2 | 3rd group sent as secure | ||||
4 | 4th group sent as secure | ||||
8 | 5th group sent as secure | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
2 | 1 | Motion detection - blind time | 0 to 15 (Default) |
(0.5-8 seconds, time [s] = 0.5 x (value+1)) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
20 | 1 | Tamper - sensitivity | 0 | tamper inactive | |
1 to 121 (Default) |
(0.08-2g; every 0.016g) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
22 | 2 | Tamper - alarm cancellation delay | 1 to 32767 (Default) |
in seconds | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
24 | 1 | Tamper - operating modes | 0 (Default) |
tamper only | |
1 | tamper and earthquake detector | ||||
2 | tamper and orientation in space | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
25 | 1 | Tamper - alarm cancellation | 0 | do not send tamper cancellation report | |
1 (Default) |
send tamper cancellation report | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
28 | 1 | Tamper - broadcast mode | 0 (Default) |
tamper alarm sent to 3rd association group | |
1 | tamper alarm sent in broadcast mode | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
29 | 1 | Tamper - backward compatible broadcast mode | 0 (Default) |
backward compatible tamper alarm sent to 5th association group | |
1 | backward compatible tamper alarm sent in broadcast mode | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
3 | 1 | Motion detection - pulse counter | 0 | 1 pulse | |
1 (Default) |
2 pulse | ||||
2 | 3 pulse | ||||
3 | 4 pulse | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
4 | 1 | Motion detection - window time | 0 | 4 seconds | |
1 | 8 seconds | ||||
2 (Default) |
12 seconds | ||||
3 | 16 seconds | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
40 | 2 | Illuminance report - threshold | 0 | reports are not sent | |
1 to 32767 (Default) |
(illuminance in lux) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
42 | 2 | Illuminance report - interval | 0 | periodical reports are not sent | |
1 to 32767 (Default) |
(in seconds) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
6 | 2 | Motion detection - alarm cancellation delay | 1 to 32767 (Default) |
in seconds | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
60 | 2 | Temperature report - threshold | 0 | reports are not sent | |
1 to 255 (Default) |
(0.1-25.5°C, 0.1°C step) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
62 | 2 | Temperature measuring - interval | 0 | temperature is not measured | |
1 to 32767 (Default) |
(in seconds) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
64 | 2 | Temperature report - interval | 0 (Default) |
periodical reports are not sent | |
1 to 32767 | (in seconds) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
66 | 2 | Temperature offset | -1000 to 1000 (Default) |
(-100 - 100°C, 0.1°C step) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
8 | 1 | Motion detection - operating mode | 0 (Default) |
PIR sensor always active | |
1 | PIR sensor active during the day only | ||||
2 | PIR sensor active during the night only | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
80 | 1 | Visual LED indicator - signalling mode | 0 | LED inactive | |
1 to 9 | single long blink at the moment of reporting motion. No other motion will be indicated until alarm is cancelled. | ||||
10 to 18 (Default) |
single long blink at the moment of reporting motion and one short blink each time the motion is detected again. | ||||
19 to 26 | single long blink at the moment of reporting motion and two short blinks each time the motion is detected again. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
81 | 1 | Visual LED indicator - brightness | 0 | brightness determined by the illuminance(parameters 82 and 83) | |
1 to 100 (Default) |
(1-100%) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
82 | 2 | Visual LED indicator - illuminance for low indicator brightness | 0 to 83 | (in lux) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
83 | 2 | Visual LED indicator - illuminance for high indicator brightness | 82 to 32767 (Default) |
(in lux) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
86 | 2 | Visual LED indicator - temperature for blue colour | 0 to 87 (Default) |
(in Celsius degree) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
87 | 2 | Visual LED indicator - temperature for red colour | 86 to 255 | (in Celsius degree) | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
89 | 1 | Visual LED indicator - tamper alarm | 0 | tamper alarm is not indicated | |
1 (Default) |
tamper alarm is indicated | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
9 | 2 | Motion detection - night/day | 1 to 32767 (Default) |
(1-32767 lux) | |