There are over 4408 interoperable
| Group ID | Group Profile Name | Profile | Maximum Nodes | Description | Endpoint ID | Commands |
|---|---|---|---|---|---|---|
| 1 | 1 | “Lifeline” reports the device status and allows for assigning single device only (main controller by default). | 0 | |||
| 2 | 5 | “CO Alarm” is assigned to the device status - devices in this group will be switched on/off when CO Alarm status changes. | 0 | |||
| 3 | 5 | “CO Alarm” is assigned to the device status - devices in this group will receive notification when CO Alarm status changes. Useful for devices that can trigger alarms. | 0 | |||
| 4 | 5 | “CO Level” is assigned to measured CO level - devices in this group will be switched on/off after exceeding the level of CO concentration specified in parameter 14. | 0 | |||
| 5 | 5 | “Tamper Alarm” is assigned to the tamper - sends tamper alarm and cancellation frames to the associated devices. | 0 | |||
| 6 | 5 | “CO Alarm BC” is assigned to the device status - devices in this group will be switched on/off when CO Alarm status changes. Provides backward compatibility with controllers not supporting Z-Wave+ protocol. | 0 | |||
| 7 | 5 | “Tamper Alarm BC” is assigned to the tamper - sends tamper alarm and alarm cancellation frames to the associated devices. Provides backward compatibility with controllers not supporting Z-Wave+ protocol. | 0 |