Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Model: Dimming Switch Module (Dual mode) (ZDS-220NA)

Z-Wave Certification Number: ZC10-19086723

Procedure	Instructions
Where to find S2 DSK on product	Not support
Classic Inclusion	Include or exclude the ZDS-220 from the existing Z-Wave home control network with your primary controller. - Refer to your primary controller instructions to process the inclusion / exclusion setup procedure. - When prompted by your primary controller, triple click the PROG button within 1 second. (The unit will enter classical inclusion/exclusion first, then jump to NWI, and after 20 seconds, it will finally exit NWI mode automatically if there is no inclusion/exclusion request.) - The primary controller should indicate that the action was successful. If the controller indicates the action was unsuccessful, please repeat the procedure.
Classic Exclusion	Include or exclude the ZDS-220 from the existing Z-Wave home control network with your primary controller. - Refer to your primary controller instructions to process the inclusion / exclusion setup procedure. - When prompted by your primary controller, triple click the PROG button within 1 second. (The unit will enter classical inclusion/exclusion first, then jump to NWI, and after 20 seconds, it will finally exit NWI mode automatically if there is no inclusion/exclusion request.) - The primary controller should indicate that the action was successful. If the controller indicates the action was unsuccessful, please repeat the procedure.
Controller Classic Inclusion	Include or exclude the ZDS-220 from the existing Z-Wave home control network with your primary controller. - Refer to your primary controller instructions to process the inclusion / exclusion setup procedure. - When prompted by your primary controller, triple click the PROG button within 1 second. (The unit will enter classical inclusion/exclusion first, then jump to NWI, and after 20 seconds, it will finally exit NWI mode automatically if there is no inclusion/exclusion request.) - The primary controller should indicate that the action was successful. If the controller indicates the action was unsuccessful, please repeat the procedure.
Controller Classic Exclusion	Include or exclude the ZDS-220 from the existing Z-Wave home control network with your primary controller. - Refer to your primary controller instructions to process the inclusion / exclusion setup procedure. - When prompted by your primary controller, triple click the PROG button within 1 second. (The unit will enter classical inclusion/exclusion first, then jump to NWI, and after 20 seconds, it will finally exit NWI mode automatically if there is no inclusion/exclusion request.) - The primary controller should indicate that the action was successful. If the controller indicates the action was unsuccessful, please repeat the procedure.
Factory Reset Procedure	Step 1: Press and keep holding the PROG button for no less than 10 seconds. • LED state will toggle for first 5 seconds of being pressed. • LED state will toggle again after the remaining 5 seconds. Step 2: Release the PROG button then triple click the PROG button within 2 seconds of step 1. • LED will stay in previous ON or OFF stage. Remark : Please use this procedure only when the network primary controller is missing or otherwise inoperable.