There are over 4408 interoperable
| Group ID | Group Profile Name | Profile | Maximum Nodes | Description | Endpoint ID | Commands |
|---|---|---|---|---|---|---|
| 1 | 1 | Group 1 for “LifeLine”: (maximum node: one) Sensor Multilevel CC (COMMAND_CLASS_SENSOR_MULTILEVEL_V4) Notification CC,V8 (COMMAND_CLASS_NOTIFICATION) Battery CC (COMMAND_CLASS_BATTERY) Device Reset Locally CC, V4 (COMMAND_CLASS_DEVICE_RESET_LOCALLY) *. Factory Reset [COMMAND_CLASS_ DEVICE_RESET_LOCALLY] [NOTIFICATION_REPORT] 1. Press and hold the function button for 10 seconds to perform factory reset and send factory reset report to the Control Panel. *. Battery: [COMMAND_CLASS_BATTERY] [BATTERY_REPORT] 0x64 --- 100% Battery Full 0x5A --- 90% Battery 0x50 --- 80% Battery 0x46 --- 70% Battery 0x3C --- 60% Battery 0x32 --- 50% Battery 0x28 --- 40% Battery 0x1E --- 30% Battery 0x14 --- 20% Low Battery 0xFF --- Battery Dead (Cut Off) Cut Off --- The device will stop working and the LED will flash every 4 seconds. *. Water Alarm/Restore: [COMMAND_CLASS_NOTIFICATION] [NOTIFICATION_REPORT] Water Alarm: 00 00 00 FF 05 02 00 Water Restore: 00 00 00 FF 05 00 01 02 *. Test Button: [WAKE_UP_NOTIFICATION] Press the function button once to awaken the Water Leak Sensor and it will send a wake up notification along with temperature and humidity report to the Control Panel. *. Temperature/Humidity: [COMMAND_CLASS_SENSOR_MULTILEVEL][SENSOR_MULTILEVEL_REPORT] Press the function button once to send temperature and humidity information to the Control Panel. Temperature: 01 42 09 D1 If temperature signal 01 42 09 D1 is transmitted, 09 D1 can be viewed as 0x09D1 in Hexadecimal number. You can convert hexadecimal to decimal and divide by 100 to check the temperature data (in Celsius). 0x09D1=2513=25.13℃. *. Humidity: 05 02 00 3B If humidity signal 05 02 00 3B is transmitted, 00 3B can be viewed as 0x003B in Hexadecimal number. You can convert hexadecimal to decimal to check the humidity level (in percentage). 003B=0x003B=59% | 0 | |||
| 2 | 1 | Group 2 for “Basic Set”: (maximum node: one) 1. When the Water Leak Sensor is triggered, it will send “Basic set” (0xFF) to the node in Group 2. 2. When the Water Leak Sensor is restored, it will send “Basic set” (0x00) to the node in Group 2. | 0 |