There are over 4252 interoperable
| Group ID | Group Profile Name | Profile | Maximum Nodes | Description | Endpoint ID | Commands |
|---|---|---|---|---|---|---|
| 1 | Lifeline | 5 | Supports the following commands: • Device Reset Locally: triggered upon request, • Sensor multilevel report: triggered upon temperature change, • Meter report: triggered upon energy consumption change according to configuration parameters 40, 42, • Notification report: triggered upon current overload detection, • Thermostat mode: triggered upon thermostat mode change • Thermostat operating state: triggered upon thermostat operating state (Idle, Heating, Cooling) | 0 | ||
| 2 | Change of output Q | 5 | Supports the following command: • Basic set: triggered by change of output Q | 0 | ||
| 3 | Basic on/off too high too low T | 5 | Supports the following command: • Basic set: triggered when actual temperature reaches Too High or Too Low temperature limit; Heat mode: when temperature reaches Too High Temperature Limit reports OFF (0x00), when temperature reaches Too Low Temperature Limit reports ON (0xFF). Cool mode: when temperature reaches Too High Temperature Limit reports ON (0xFF), when temperature reaches Too Low Temperature Limit reports OFF (0x00). Thermostat off mode reports OFF (0x00) on both limits reached. Hysteresis is 1°C. | 0 | ||
| 4 | Sensor multilevel report | 5 | Supports the following command: • Sensor multilevel report: triggered by change of temperature for threshold defined in configuration parameter 120 | 0 |