Z-Wave Products

TThere are thousands of interoperable Z-Wave products throughout the world, and over 94 million Z-Wave products have been sold since our beginnings in 2001. All of them work together regardless of brand, because they're all based on the common Z - Wavestandard.Browse our Product Finder to see what Z -Wave can do for you.

Z-Wave Configuration Capabilities

Model: Wall Switch (FGWDSEU-221)

Z-Wave Certification Number: ZC10-19106772


Parameter Number

Parameter Size

Parameter Name

Parameter Values

1 1 Remember device state 0 remains switched off after restoring power
  1
(Default)
restores remembered state after restoring power

Parameter Number

Parameter Size

Parameter Name

Parameter Values

10 4 LED frame – power limit 500 to 36800
(Default)
(50.0-3680.0W, step 0.1W) – power threshold

Parameter Number

Parameter Size

Parameter Name

Parameter Values

11 1 LED frame – colour when ON 0 LED disabled
  1
(Default)
White
  2 Red
  3 Green
  4 Blue
  5 Yellow
  6 Cyan
  7 Magenta
  8 colour changes smoothly depending on measured power
  9 colour changes in steps depending on measured power

Parameter Number

Parameter Size

Parameter Name

Parameter Values

12 1 LED frame – colour when OFF 0
(Default)
LED disabled
  1 White
  2 Red
  3 Green
  4 Blue
  5 Yellow
  6 Cyan
  7 Magenta

Parameter Number

Parameter Size

Parameter Name

Parameter Values

13 1 LED frame – brightness 0 LED disabled
  1 to 100
(Default)
(1-100% brightness)
  101 brightness directly proportional to measured power
  102 brightness inversely proportional to measured power

Parameter Number

Parameter Size

Parameter Name

Parameter Values

150 1 First channel – operating mode 0
(Default)
standard operation
  1 delayed OFF
  2 single pulse

Parameter Number

Parameter Size

Parameter Name

Parameter Values

151 1 Second channel – operating mode 0
(Default)
standard operation
  1 delayed OFF
  2 single pulse

Parameter Number

Parameter Size

Parameter Name

Parameter Values

152 1 First channel - reaction to switch for delayed OFF / pulse modes 0
(Default)
cancel mode and set default state
  1 no reaction - mode runs until it ends
  2 reset timer - start counting from the beginning

Parameter Number

Parameter Size

Parameter Name

Parameter Values

153 1 Second channel - reaction to switch for delayed OFF / pulse modes 0
(Default)
cancel mode and set default state
  1 no reaction - mode runs until it ends
  2 reset timer - start counting from the beginning

Parameter Number

Parameter Size

Parameter Name

Parameter Values

154 2 First channel - time parameter for delayed OFF / pulse modes 0 0.1 second
  1 to 32000
(Default)
(1-32000s, 1s step) – time parameter

Parameter Number

Parameter Size

Parameter Name

Parameter Values

155 2 Second channel - time parameter for delayed OFF / pulse modes 0 0.1 second
  1 to 32000
(Default)
(1-32000s, 1s step) – time parameter

Parameter Number

Parameter Size

Parameter Name

Parameter Values

156 2 First channel – Switch ON value sent to 2nd and 3rd association groups 0 to 99 2nd association group
  255
(Default)
3rd association group

Parameter Number

Parameter Size

Parameter Name

Parameter Values

157 2 First channel – Switch OFF value sent to 2nd and 3rd association groups 0 to 99
(Default)
2nd association group
  255 3rd association group

Parameter Number

Parameter Size

Parameter Name

Parameter Values

158 2 First channel – Double Click value sent to 2nd and 3rd association groups 0 to 99
(Default)
2nd association group
  255 3rd association group

Parameter Number

Parameter Size

Parameter Name

Parameter Values

159 2 Second channel – Switch ON value sent to 4th and 5th association groups 0 to 99 4th association group
  255
(Default)
5th association group

Parameter Number

Parameter Size

Parameter Name

Parameter Values

160 2 Second channel – Switch OFF value sent to 4th and 5th association groups 0 to 99
(Default)
4th association group
  255 5th association group

Parameter Number

Parameter Size

Parameter Name

Parameter Values

161 2 Second channel – Double Click value sent to 4th and 5th association groups 0 to 99
(Default)
4th association group
  255 5th association group

Parameter Number

Parameter Size

Parameter Name

Parameter Values

2 4 First channel – overload safety switch 0
(Default)
function disabled
  10 to 45000 (1.0-4500.0W, step 0.1W) – power threshold

Parameter Number

Parameter Size

Parameter Name

Parameter Values

20 1 Buttons operation 1
(Default)
1st and 2nd button toggle the load
  2 1st button turns the load ON, 2nd button turns the load OFF
  3 device works in 2-way/3-way switch configuration

Parameter Number

Parameter Size

Parameter Name

Parameter Values

24 1 Buttons orientation 0
(Default)
default (1st button controls 1st channel, 2nd button controls 2nd channel)
  1 reversed (1st button controls 2nd channel, 2nd button controls 1st channel)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

25 1 Outputs orientation 0
(Default)
default (Q1 - 1st channel, Q2 - 2nd channel)
  1 reversed (Q1 - 2nd channel, Q2 - 1st channel)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

3 4 Second channel – overload safety switch 0
(Default)
function disabled
  10 to 36200 (1.0-3620.0W, step 0.1W) – power threshold

Parameter Number

Parameter Size

Parameter Name

Parameter Values

30 4 Alarm configuration - 1st slot 1 to 0 [MSB] – Notification Type
  2 Notification Value
  3 Event/State Parameters
  4 [LSB] – action

Parameter Number

Parameter Size

Parameter Name

Parameter Values

31 4 Alarm configuration - 2nd slot 1 [MSB] – Notification Type
  2 Notification Value
  3 Event/State Parameters
  4 [LSB] – action

Parameter Number

Parameter Size

Parameter Name

Parameter Values

32 4 Alarm configuration - 3rd slot 1 [MSB] – Notification Type
  2 Notification Value
  3 Event/State Parameters
  4 [LSB] – action

Parameter Number

Parameter Size

Parameter Name

Parameter Values

33 4 Alarm configuration - 4th slot 0
(Default)
Notification Type
  1 [MSB] – Notification Type
  2 Notification Status
  3 Event/State Parameters
  4 [LSB] – action

Parameter Number

Parameter Size

Parameter Name

Parameter Values

34 4 Alarm configuration - 5th slot 1 [MSB] – Notification Type
  2 Notification Status
  3 Event/State Parameters
  4 [LSB] - action

Parameter Number

Parameter Size

Parameter Name

Parameter Values

35 2 Alarm configuration – duration 0 infinite
  1 to 32400
(Default)
(1s-9h, 1s step) – duration

Parameter Number

Parameter Size

Parameter Name

Parameter Values

40 1 First button – scenes sent 1 Key pressed 1 time
  2 Key pressed 2 time
  4 Key pressed 3 time
  8 Key hold down and key released

Parameter Number

Parameter Size

Parameter Name

Parameter Values

41 1 Second button – scenes sent 1 Key pressed 1 time
  2 Key pressed 2 time
  4 Key pressed 3 time
  8 Key hold down and key released

Parameter Number

Parameter Size

Parameter Name

Parameter Values

60 1 Power reports – include self-consumption 0
(Default)
Self-consumption not included
  1 Self-consumption included

Parameter Number

Parameter Size

Parameter Name

Parameter Values

61 2 Power reports for first channel – on change 0 reporting on change disabled
  1 to 500
(Default)
(1-500%, 1% step) – minimal change

Parameter Number

Parameter Size

Parameter Name

Parameter Values

62 2 Power reports for first channel – periodic 0 periodic reports disabled
  30 to 32400
(Default)
(30s-9h, 1s step) – time interval

Parameter Number

Parameter Size

Parameter Name

Parameter Values

63 2 Power reports for second channel – on change 0 reporting on change disabled
  1 to 500
(Default)
(1-500%, 1% step) – minimal change

Parameter Number

Parameter Size

Parameter Name

Parameter Values

64 2 Power reports for second channel – periodic 0 periodic reports disabled
  30 to 32400
(Default)
(30s-9h, 1s step) – time interval

Parameter Number

Parameter Size

Parameter Name

Parameter Values

65 2 Energy reports for first channel – on change 0 reporting on change disabled
  1 to 500
(Default)
(0.01-5kWh, 0.01kWh step) – minimal change

Parameter Number

Parameter Size

Parameter Name

Parameter Values

66 2 Energy reports for first channel – periodic 0 periodic reports disabled
  30 to 32400
(Default)
(30s-9h, 1s step) – time interval

Parameter Number

Parameter Size

Parameter Name

Parameter Values

67 2 Energy reports for second channel – on change 0 reporting on change disabled
  1 to 500
(Default)
(0.01-5kWh, 0.01kWh step) – minimal change

Parameter Number

Parameter Size

Parameter Name

Parameter Values

68 2 Energy reports for second channel – periodic 0 periodic reports disabled
  30 to 32400
(Default)
(30s-9h, 1s step) – time interval