Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Procedure	Instructions
Classic Inclusion	1. Initiate inclusion (pairing) in the app (or web interface). 2. Tap the upper paddle of the switch 3 times. 3. The LED indicator will blink to signal communication and stay on/off when communication is concluded.
Classic Exclusion	1. Bring your Z-Wave gateway (hub) close to the switch if possible 2. Put the Z-Wave hub into exclusion mode 3. Tap the lower paddle on the switch 3 times quickly 4. Your hub will confirm exclusion and the device will disappear from your controller's device list
Factory Reset Procedure	If your primary controller is missing or inoperable, you may need to reset the device to factory settings. To complete the reset process manually, tap-tap-tap’n’hold the upper paddle for at least 10 seconds. The LED indicator will flash to confirm successful reset. NOTE: All previously recorded activity and custom settings will be erased from the device’s memory
Other Special Features	Scene Control for selected hubs. OTA firmware updates.