There are over 4392 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 151 | 2 | Threshold of power report | 0 to 200 (Default) |
Available settings: 0 - 200 (0 - 200W) | |
| 0 | 0 - The function is disabled. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 152 | 1 | Percentage threshold of power report | 0 | The function is disabled. | |
| 0 to 100 (Default) |
Available settings: 0 - 100 (0 - 100%) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 171 | 4 | Power report frequency | 0 | The function is disabled. | |
| 3600 to 2678400 (Default) |
Available settings: 3600- 2678400 (3600 - 2678400s) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 172 | 4 | Energy report frequency | 0 | The function is disabled. | |
| 3600 to 2678400 (Default) |
Available settings: 3600- 2678400 (3600 - 2678400s) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 173 | 4 | Voltage report frequency | 0 (Default) |
The function is disabled. | |
| 3600 to 2678400 | Available settings: 3600- 2678400 (3600 - 2678400s) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 174 | 4 | Electricity report frequency | 0 (Default) |
The function is disabled. | |
| 3600 to 2678400 | Available settings: 3600- 2678400 (3600 - 2678400s) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 20 | 1 | Overload protection | 0 | The function is disabled | |
| 1 (Default) |
The function is enabled. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 21 | 1 | Setting device status after power failure | 0 (Default) |
Smart Plug memorizes its state after a power failure. | |
| 1 | Smart Plug does not memorize its state after a power failure. Connected device will be on after the power supply is reconnected. | ||||
| 2 | Smart Plug does not memorize its state after a power failure. Connected device will be off after the power supply is reconnected. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 24 | 1 | Notification when Load status change | 0 | The function is disabled. | |
| 1 (Default) |
Send Basic report. | ||||
| 2 | Send Basic report only when Load condition is not changed by Z-WAVE Command. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 254 | 1 | Enable/disable the configuration command | 0 (Default) |
Unlock | |
| 1 | Lock | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 27 | 1 | Indicator modes | 0 (Default) |
The indicator light remains the same as the load on/off status. When the load is on, the light is on, and the off is off. | |
| 1 | Within 5 seconds after the operation load, the indicator light is consistent with the load on/off status, and then the indicator is off. | ||||