Z-Wave Products

There are over 4102 interoperable Z-Wave products throughout the world, and over 94 million Z-Wave products have been sold since our beginnings in 2001. All of them work together regardless of brand, because they're all based on the common Z - Wavestandard.Browse our Product Finder to see what Z -Wave can do for you.

Z-Wave Configuration Capabilities

Model: S100 Master Rocker for Dimmer (Russia) (10004021-13x)

Z-Wave Certification Number: ZC10-20016841


Parameter Number

Parameter Size

Parameter Name

Parameter Values

1 1 Association LED 0
(Default)
Turns the LED OFF
  255 Turns the LED ON

Parameter Number

Parameter Size

Parameter Name

Parameter Values

12 1 Behavior of LED in repose 0
(Default)
LED OFF
  255 LED on at 20 percent of maximum level

Parameter Number

Parameter Size

Parameter Name

Parameter Values

13 1 Lock Input 0
(Default)
Unlock the direct control of load
  255 Lock the direct control of load

Parameter Number

Parameter Size

Parameter Name

Parameter Values

15 2 Reset default 17170 Parameters, except Lock long press are restored to default
  39015 Parameters, Groups, and Z-Wave status are restored to default value.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

18 1 Manual association lock 0
(Default)
Unblocked
  255 Blocked

Parameter Number

Parameter Size

Parameter Name

Parameter Values

19 1 Press action 0
(Default)
When short press, switches between the last power on and off (depending on the status of the associated control) by sending a Basic Set to 0x00 or 0xFF to the associated nodes. The Slider does not work.
  1 When short press, always activates those associated with the last power on by sending a Basic Set to 0xFF
  2 When short press, always deactivates associates by sending a Basic Set to 0x00
  4 When short press, always activates the associated nodes by sending a Basic Set to 0xFFWhen hold press from 2 seconds to 10 seconds always turns off the associated nodes by sending a Basic Set to 0x00. Does not send Node Info nor does the central LED flash.
  5 The described actions are performed for value ‘0’, but sending the Multilevel Set

Parameter Number

Parameter Size

Parameter Name

Parameter Values

20 1 Identify 255 the central LED blinks for 5 seconds in order to identify the device

Parameter Number

Parameter Size

Parameter Name

Parameter Values

21 2 Device state 45056 Load is OFF
  45057 Load is ON
  45312 Lighting percentage level associated node

Parameter Number

Parameter Size

Parameter Name

Parameter Values

27 1 Lock long press 0
(Default)
Long press works as described previously
  255 Long press from 2 seconds to 20 seconds does not send a Node info. With a long press above 30 seconds, all parameters except Lock long press are restored to default and device sends a Node Info.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

28 1 Consult on Touch Detection 0
(Default)
If there is 1 Associated device, when Touch is detected, controlled device state will be consulted
  255 If there is 1 Associated device, when Touch is detected, controlled device state is not consulted.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

29 1 Enable automatic reporting CENTRAL_SCENE 0
(Default)
Enables CC Central Scene Notification when there are no nodes associated with the control group and Inhibits error signaling by pressing less than 2 seconds if there are no associated nodes.
  255 Enables error signaling by pressing less than 2 seconds if there are no associated nodes