There are over 4409 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 1 | 1 | LED Indicator Mode for Dimmer | 0 (Default) |
LED indicator is on when switch is off, LED indicator is off when switch is on (default); | |
| 1 | LED indicator is on when switch is on, LED indicator is off when switch is off; | ||||
| 2 | LED indicator is always OFF and LED’s don’t indicate brightness level during dimming; | ||||
| 3 | LED indicator is always ON. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 10 | 4 | Auto Turn-Off Timer for Relay | 0 (Default) |
timer disabled | |
| 1 to 65535 | minutes | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 11 | 4 | Auto Turn-On Timer for Relay | 0 (Default) |
timer disabled | |
| 1 to 65535 | minutes | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 12 | 1 | On Off Status Aer Power Failure | 0 | dimmer and relay forced to OFF (regardless of state prior to power outage); | |
| 1 | dimmer forced to off, relay forced to on; | ||||
| 2 | dimmer forced to on, relay forced to off; | ||||
| 3 (Default) |
remembers and restores on/off status for dimmer and relay aer power failure (default); | ||||
| 4 | remembers and restores on/off status for dimmer, relay forced to on; | ||||
| 5 | remembers and restores on/off status for dimmer, relay forced to off; | ||||
| 6 | dimmer forced to on, remembers and restores on/off status for relay; | ||||
| 7 | dimmer forced to off, remembers and restores on/off status for relay; | ||||
| 8 | dimmer and relay forced to ON. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 13 | 1 | Ramp Rate Control for Dimmer | 0 | instant on/off; | |
| 1 to 99 (Default) |
seconds | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 14 | 1 | Minimum Brightness | 1 to 99 (Default) |
% brightness | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 15 | 1 | Maximum Brightness | 1 to 99 (Default) |
% brightness | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 17 | 1 | Double Tap Function for Dimmer | 0 (Default) |
the light will turn on to full brightness with double tap (default). | |
| 1 | the light will turn on to the maximum brightness level set in Parameter 15 with double tap. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 18 | 1 | Double Tap Function for Dimmer: Disable/Enable | 0 (Default) |
double tap to full / maximum brightness level enabled (default). | |
| 1 | double tap to full / maximum brightness level disabled, single tap turns light on to last brightness level (or custom value set in Parameter 23) | ||||
| 2 | double tap to full / maximum brightness level disabled, single tap turns light on to full brightness level. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 19 | 1 | Enable/Disable Load Control for Dimmer (Smart Bulb Setting) | 0 | manual control disabled. | |
| 1 (Default) |
manual control enabled | ||||
| 2 | manual and Z-Wave control disabled. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 2 | 1 | LED Indicator Control for Relay | 0 (Default) |
LED indicator is on when relay is off, LED indicator is off when relay is on (default); | |
| 1 | LED indicator is on when relay is on, LED indicator is off when relay is off; | ||||
| 2 | LED indicator is always OFF | ||||
| 3 | LED indicator is always ON | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 20 | 1 | Enable/Disable Load Control for Relay (Remote Control Setting) | 0 | manual control disabled. | |
| 1 (Default) |
manual control enabled | ||||
| 2 | manual and Z-Wave control disabled. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 21 | 1 | Manual Dimming Speed | 1 to 99 (Default) |
seconds | |
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 22 | 1 | Z-Wave Ramp Rate for Dimmer | 0 (Default) |
Z-Wave on/off ramp rate matches the manual ramp rate set in Parameter 13. | |
| 1 | Z-Wave on/off ramp rate is set separately through its command class in the hub. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 23 | 1 | Custom Brightness Level On for Dimmer | 0 (Default) |
last brightness level | |
| 1 to 99 | % brightness | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 3 | 1 | LED Indicator Color for Dimmer | 0 (Default) |
white | |
| 1 | blue | ||||
| 2 | green | ||||
| 3 | red | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 4 | 1 | LED Indicator Color for Relay | 0 (Default) |
white | |
| 1 | blue | ||||
| 2 | green | ||||
| 3 | red | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 5 | 1 | LED Indicator Brightness for Dimmer | 0 | bright (100%) | |
| 1 (Default) |
medium (60%) | ||||
| 2 | low (30%) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 6 | 1 | LED Indicator Brightness for Relay | 0 | bright (100%) | |
| 1 (Default) |
medium (60%) | ||||
| 2 | low (30%) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 7 | 1 | LED Indicator Mode for Scene Control | 0 | LED’s enabled to indicate scene triggers; | |
| 1 (Default) |
LED’s disabled to indicate scene triggers (default). | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 8 | 4 | Auto Turn-Off Timer for Dimmer | 0 (Default) |
timer disabled | |
| 1 to 65535 | minutes | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 9 | 4 | Auto Turn-On Timer for Dimmer | 0 (Default) |
timer disabled | |
| 1 to 65535 | minutes | ||||