TThere are thousands of interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 1 | 1 | 7210Range | Set the range about magnetic field Range: 0-the range of parameter 0x02 is 0x00000001-0x00004B00, the range of parameter 0x03 is 0x00000001-0x00002300. 1- the range of parameter 0x02 is 0x00000001-0x0002EE00, the range of parameter 0x03 is 0x00000001-0x00015E00. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 1 | No | No | No |
From |
To |
Description |
|||
| 0 | 1 | 0-the range of parameter 0x02 is 0x00000001-0x00004B00 and the range of parameter 0x03 is 0x00000001-0x00002300. 1- the range of parameter 0x02 is 0x00000001-0x0002EE00 and the range of parameter 0x03 is 0x00000001-0x00015E00. | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 10 | 1 | LowBatPrecent | This parameter defines a battery level as the “low battery”. Range: 0x05-0x32 | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 10 | 5 | 50 | No | No | No |
Value |
Description |
||||
| 5 | 0x0A defines the low battery level. 0x05 means that device will send a low level alarm report when the battery levle is less than 5%. 0x32 means that device will send a low level alarm report when the battery levle is less than 50%. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 14 | 1 | BasicEnable | Enable/Disable BASIC SET command 0 – Disable. 1 – Enable. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 1 | No | No | No |
Value |
Description |
||||
| 0 | parameter 14 will disable/enable the basic set command when it is triggered. the value 0 means that sensor will not send basic set command when the sensor is triggered, value 1 means that the sensor willl send basic set command when it is triggered. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 15 | 1 | BasicReverse | Door Sensor reverse its value of BASIC SET when the magnet is triggered. 0 -Send BASIC SET VALUE = 0xFF/0x00 to nodes associated with group 2 when door is opened/closed. 1 –Send BASIC SET VALUE = 0/255 to nodes associated with group 2 when door is opened/closed. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 1 | No | No | No |
From |
To |
Description |
|||
| 0 | 1 | 0 -Send BASIC SET VALUE = 0xFF/0x00 to nodes associated with group 2 when door is opened/closed. 1 –Send BASIC SET VALUE = 0/255 to nodes associated with group 2 when door is opened/closed. | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 2 | 4 | 7210OP | 7210OP Set the average magnetic field in ut Range: 0x00000001-0x00004B00 or 0x00000001-0x0002EE00 | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 640 | 1 | 19200 | No | No | No |
Value |
Description |
||||
| 1 | the average magnetic field. 0x00000001 means that the magnetic field is 1 ut, 0x0002EE00 means that the magnetic field is 192000 ut | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 20 | 1 | Bypass | Enable/Disable Bypass mode 0 – Enable. 1 – Disable. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 0 | 1 | No | No | No |
From |
To |
Description |
|||
| 0 | 1 | parameter 20 disable/enable the bypass mode. the value 0 means that sensor will enter a bypass mode when the bypass button is pressed, value 0 means that sensor will not enter bypass mode when the bypass button is pressed | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 21 | 1 | temp | The interval time the Door Sensor reports the Multilevel Sensor Report to association group1 in minutes. 0x0F-0xFF | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 15 | 15 | 127 | No | No | No |
From |
To |
Description |
|||
| 15 | 127 | parameter 0x21 assign the time the sensor send the temperature report to associated node in minute. For example 0x10 means that sensor will send a temperature report every 14 mins | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 254 | 1 | LockConfig | Enable/Disable configuration set 0 – Enable. 1 – Disable. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 1 | No | No | No |
From |
To |
Description |
|||
| 0 | 1 | parameter 0xFE disable/enable the configuration set function. value 0 means that any configuration set will be disabled, value 1 means that configuration set will be enbale,you can change the values of the configration parameters | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 3 | 4 | 7210PolHyst | Set the offset about magnetic field Range: 0x00000001-0x00002300 or 0x00000001-0x00015E00 | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 200 | 1 | 8960 | No | No | No |
Value |
Description |
||||
| 1 | the offset of the magnetic field. 0x00000001 means that the magnetic field is 1 ut, 0x0002EE00 means that the magnetic field is 89600 ut | ||||