Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Model: Keypad (PLBE10000)

Z-Wave Certification Number: ZC12-20050055

Procedure	Instructions
Where to find S2 DSK on product	The first 5 digits of the DSK code can be found on the QR Code on the back of the product.
Classic Inclusion	If your Z-wave controller does not support SmartStart, follow these instructions for Product Classic Inclusion: Activate the inclusion mode (teach-in mode) on the Z-Wave controller. (for more details, please refer to the Z-Wave controller's user manual) Or press the "+" button (Include / Add) in your Z-Wave app and follow the instructions to set the Z-Wave controller to include mode. Keep the device within range of the Z-Wave controller. Press the Link button 3 times quickly (within 1.5 seconds) to start the inclusion on the device. The Link LED starts flashing green for up to 60 seconds Successful inclusion is displayed in the app or on the Z-Wave controller and the link LED on the device lights up green. Repeat the inclusion process if it was not successful. If a new attempt fails as well, first carry out a factory reset on the device, see 2.5.
Classic Exclusion	Activate the exclusion mode (learn mode) on the Z-Wave controller. (for more details, please refer to the Z-Wave controller's user manual) Or press the "-" button (Remove / Exclusion) in your Z-Wave app and follow the instructions to set the Z-Wave controller to Exclusion mode. Press the Link button 3 times quickly (within 1.5 seconds) to start the exclusion on the device. The Link LED starts flashing green for up to 60 seconds The successful exclusion is displayed in the app or on the Z-Wave controller and the link LED on the device lights up green.
Wake-Up Procedure	It´s a FLIRS device and hence does not support wake up command class
Factory Reset Procedure	Press and hold the Link button for at least 5 seconds. The device is now reset to factory settings. Hint: Please use this procedure only if the primary network controller is missing or otherwise not functional. If the device is set to factory default, the status is set to "not included" and the association settings and possible configurations are reset to default.
Dynamic Capabilities	Not applicable
Notice of Capability Rediscovery Needed	Not applicable