Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Model: Ezlo PlugHub Energy (Ezlo-PlugHub-US)

Z-Wave Certification Number: ZC10-20056917

Procedure	Instructions
Controller Replication	Generic Z-Wave Add 1. Open the mobile app, and tap on the three-line icon in the top right corner to open the left-hand-side menu, then select Devices. 2. On the device screen, tap on Add Device 3. Look for the device you want to pair, once you find it select it from the list. If your device is in the list, you will get a dedicated Device Pairing wizard, which will walk you through the procedure step by step. 4. The controller it’s set into inclusion mode and the message: Add new devices now… will appear at the top. The controller sets a 60-second countdown timer, during which it will keep scanning for devices. 5. Follow the inclusion steps to pair the device. Once your device is detected, you'll get a confirmation pop-up message on the screen, and then you can go on to assign a name and a room for the device. You can tap on I'm Done Adding Devices to then wrap up the process, after which point you will see your device in the Devices screen.
Controller Classic Exclusion	Generic Z-Wave Remove 1. The unit can be taken to exclusion by going to the device which is going to be excluded, then tap on the trash can icon. 2. Select UNPAIR, which will set the controller into exclusion mode, you will see a message at the top of the screen which says: Remove device now… 3. Follow the instructions to exclude the device, after this process, the device will be removed from the z-wave network and from the UI.
Controller Learn Mode	LearnMode is not supported in this version.
Factory Reset Procedure	Press and hold Button for More than 10 seconds. LED will start flashing
Where to find S2 DSK on product	The QR code version of the DSK may be found on the back of the product as well as on the packaging.
Controller Classic Inclusion	Generic Z-Wave Add 1. Open the mobile app, and tap on the three-line icon in the top right corner to open the left-hand-side menu, then select Devices. 2. On the device screen, tap on Add Device 3. Look for the device you want to pair, once you find it select it from the list. If your device is on the list, you will get a dedicated Device Pairing wizard, which will walk you through the procedure step by step. 4. The controller it’s set into inclusion mode and the message: Add new devices now… will appear at the top. The controller sets a 60-second countdown timer, during which it will keep scanning for devices. 5. Follow the inclusion steps to pair the device. Once your device is detected, you'll get a confirmation pop-up message on the screen, and then you can go on to assign a name and a room for the device. You can tap on I'm Done Adding Devices to then wrap up the process, after which point you will see your device in the Devices screen.
Other Special Features	Soft reset Wifi reset