TThere are thousands of interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 1 | 1 | Heartbeat Interval | This parameter is the number minutes between heartbeats. Heartbeats are automatic battery reports on a timer after the last event. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 70 | 1 | 70 | No | No | Yes |
Value |
Description |
||||
| 1 | This parameter is the interval between heartbeats in minutes. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 10 | 1 | Button Press Display Timeout | Timeout in seconds when any button is pressed, but a sequence is not completed and buttons are no longer being pressed | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 5 | 0 | 30 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter is the Timeout in seconds when any button is pressed. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 11 | 1 | Status Change Display Timeout | Timeout in seconds when indicator command is received from the hub to change status | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 5 | 1 | 30 | No | No | Yes |
Value |
Description |
||||
| 1 | This parameter is the Timeout in seconds when indicator command is received from the hub to change status | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 12 | 1 | Security Mode Brightness | Adjusts the brightness of the security mode buttons | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 100 | 0 | 100 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter adjusts the brightness of the security mode buttons | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 13 | 1 | Key Backlight Brightness | Adjusts the brightness of the keypad backlight. Used for Key Backlight LEDs only | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 100 | 0 | 100 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter adjusts the brightness of the keypad backlight. Used for Key Backlight LEDs only | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 14 | 1 | Ambient Light Sensor Level | Light threshold where keypad will stop backlighting if higher than | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 20 | 0 | 100 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter is the light threshold where keypad will stop backlighting if higher than | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 15 | 1 | Proximity On/OFF | Turn On and Off the Proximity Detection. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 0 | 1 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter is the Turn On and Off the Proximity Detection. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 16 | 1 | Ramp Time Config | Ramp time in units of ten milliseconds each to turn the LEDs on/off. Applies to all LEDs on the keypad | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 50 | 0 | 255 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter is the ramp time to turn the LEDs on/off in milliseconds. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 17 | 1 | Low Battery Threshold | The percentage level at which the display would turn on the yellow battery indicator (whenever the display is on). | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 30 | 0 | 100 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter is the percentage level at which the display would turn on. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 18 | 1 | Languages Set | Sets the language on the keypad | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 31 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter sets the language on the keypad | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 19 | 1 | Warn Battery Threshold | The percentage level at which the display would turn on the red battery indicator (whenever the display is on). | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 10 | 0 | 100 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter is the percentage level at which the display would turn on the red battery indicator. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 2 | 1 | Application Retries | Number of application level retries attempted for messages either not ACKed or messages encapsulated via supervision get that did not receive a report. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 0 | 5 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter is the number of application level retries attempted for messages | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 20 | 1 | System Security Mode Blink Duration | Configurable ON time for the blink for config #22 which allows us to modify the time for the LED to be active when set to blink on a period per config 22. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 2 | 1 | 60 | No | No | Yes |
Value |
Description |
||||
| 1 | This parameter is the Configurable ON time for the blink. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 21 | 2 | Supervision Report Timeout | The number of milliseconds waiting for a Supervisory Report response to a Supervisory Get encapsulated command from the sensor before attempting a retry. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 10000 | 500 | 30000 | No | No | Yes |
Value |
Description |
||||
| 500 | This parameter is the number of milliseconds waiting for a Supervisory Report response to a Supervisory Get encapsulated command from the sensor before attempting a retry. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 22 | 2 | System Security Mode Display | System Security Mode Display: (Always, Sometimes, Never). 601 = Always On 1 - 600 = periodic interval 0 = Always Off, except when there's activit | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 601 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter is the System Security Mode Display options. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 23 | 4 | Languages Supported | Returns bitmask of languages supported. Bits set to 1 indicate that the language is supported | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 37 | 0 | 4294967295 | Yes | No | Yes |
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 24 | 1 | Calibrate Speaker | When set to 1, calibrates the speaker | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 1 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter is the Speaker calibration value. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 3 | 1 | Application Level Retry Base Wait Time Period | The number base seconds used in the calculation for sleeping between retry messages. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 5 | 1 | 60 | No | No | Yes |
Value |
Description |
||||
| 1 | This parameter is the Base seconds used in the calculation for sleeping between retry messages. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 4 | 1 | Announcement Audio Volume | Announce audio volume adjustment | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 7 | 0 | 10 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter is the Announce audio volume adjustment | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 5 | 1 | Key Tone Volume | Key Tone Volume adjustment | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 6 | 0 | 10 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter is the Key Tone Volume adjustment | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 6 | 1 | Siren Volume | Siren Volume adjustment | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 10 | 0 | 10 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter is the Siren Volume adjustment | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 7 | 1 | Long press emergency duration (seconds) | This parameter allows a user to configure the duration in seconds for the hold time required to capture a long press . This includes Emergency Buttons + Mode Buttons (Police, Fire, Medical, Disarmed, Home, Away) | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 3 | 2 | 5 | No | No | Yes |
Value |
Description |
||||
| 2 | This parameter is the special key long press duration - hold time required to capture a long press in seconds. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 8 | 1 | Long press number pad duration (seconds) | This parameter allows a user to configure the duration in seconds for the hold time required to capture a long press . This includes Number Pad + Check & X (0-9, Check, X) | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 3 | 2 | 5 | No | No | Yes |
Value |
Description |
||||
| 2 | This parameter is the hold time required to capture a long press in seconds. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 9 | 1 | Proximity Display Timeout | Timeout in seconds when proximity is detected and no input is received | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 5 | 0 | 30 | No | No | Yes |
Value |
Description |
||||
| 0 | This parameter is the Timeout in seconds when proximity is detected and no input is received | ||||