Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Model: Flood sensor iO (10002860-039)

Z-Wave Certification Number: ZC10-20076939

Procedure	Instructions
Learn Mode (adding another controller)	Triple click the Z-button quickly，and then the dut will enter into the Learn Mode.
Wake-Up Procedure	Press and hold the Z button for more than 5 seconds and release.
Other Special Features	None
Classic Exclusion	1) Open the cover. 2) Place the device within the direct range of your Z-Wave controller. 3) Set the main controller remove mode (see the controller’s manual). 4) Triple click the Z-button quickly, the LED indicator should blink fast. 5) Wait for the removing process to end. 6) Successful adding will be confirmed by the Z-Wave controller’s message.
Factory Reset Procedure	1)Power on the device, 2) Press and hold the Z button for more than 20 seconds, 3) If holding time more than 20seconds, the LED indicator will keep on for 2 seconds, which means resetting is complete. 4) The reset feature works only when the device has been included into a Z-Wave network. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable. Please use this procedure only when the network primary controller is missing or otherwise inoperable.
Classic Inclusion	1) Open the cover. 2) Place the device within the direct range of your Z-Wave controller. 3) Set the main controller in add mode (see the controller’s manual). 4) Click the Z-button once or triple click the Z-button quickly, the LED indicator should blink fast. 5) Wait for the adding process to end. 6) Successful adding will be confirmed by the Z-Wave controller’s message.