There are over 4377 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 1 | 1 | Dimming Speed - Light | This changes the speed in which the attached light dims up or down. A setting of 0 should turn the light immediately on or off (almost like an on/off switch). Increasing the value should slow down the transition speed. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 3 | 0 | 100 | No | No | No |
Value |
Description |
||||
| 0 | Speed at which light dims up or down (increments) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 10 | 2 | Auto Off Timer – Light | Automatically turns the light off after this many seconds. When the switch is turned on a timer is started that is the duration of this setting. When the timer expires, the switch is turned off. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 32767 | No | No | No |
Value |
Description |
||||
| 0 | Disabled | ||||
| 1 | Seconds | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 11 | 2 | Auto Off Timer – Fan | Automatically turns the fan off after this many seconds. When the fan is turned on a timer is started that is the duration of this setting. When the timer expires, the fan is turned off. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 32767 | No | No | No |
Value |
Description |
||||
| 0 | Disabled | ||||
| 1 | Seconds | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 12 | 1 | Default Level (Local) – Light | Default level for the dimmer when it is powered on from the local switch. A setting of 0 means that the switch will return to the level that it was on before it was turned off. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 99 | No | No | No |
Value |
Description |
||||
| 0 | Sets back to light level prior to switch turning off | ||||
| 1 | Sets light to a certain default dim level (ie: 1-99%) when powered on | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 13 | 1 | Default Level (Z-Wave) – Light | Default level for the dimmer when it is powered on from a Z-Wave command. A setting of 0 means that the switch will return to the level that it was on before it was turned off. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 99 | No | No | No |
Value |
Description |
||||
| 0 | Sets back to light level prior to switch turning off - via Z-Wave Command | ||||
| 1 | Sets light to a certain default dim level (ie: 1-99%) when powered on - via Z-Wave Command | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 14 | 1 | Default Level (Local) – Fan | Default level for the fan when it is powered on from the local switch. A setting of 0 means that the switch will return to the level that it was on before it was turned off | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 99 | No | No | No |
Value |
Description |
||||
| 0 | Sets back to fan level prior to switch turning off | ||||
| 1 | Sets fan to a certain default dim level (ie: 1-99%) when powered on | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 15 | 1 | Default Level (Z-Wave) – Fan | Default level for the fan when it is powered on from a Z-Wave command. A setting of 0 means that the switch will return to the level that it was on before it was turned off. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 99 | No | No | No |
Value |
Description |
||||
| 0 | Sets back to fan level prior to switch turning off - Z-Wave | ||||
| 1 | Sets fan to a certain default dim level (ie: 1-99%) when powered on - Z-Wave | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 16 | 1 | State After Power Restored – Light | The state the switch should return to once power is restored after power failure. 0 = off, 1-99 = level, 100=previous | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 100 | 0 | 100 | No | No | No |
Value |
Description |
||||
| 0 | Off | ||||
| 1 | Turns on to a certain percentage (1-99%) | ||||
| 100 | Returns to previous state the light was in prior to a power outage | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 17 | 1 | State After Power Restored – Fan | The state the switch should return to once power is restored after power failure. 0 = off, 1-99 = level, 100=previous. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 100 | No | No | No |
Value |
Description |
||||
| 0 | Off | ||||
| 1 | Turns on to a certain percentage (1-99%) | ||||
| 100 | Returns to previous state the fan was in prior to power outage | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 18 | 1 | Default LED Strip Color – Light | This is the color of the Light LED strip represented as part of the HUE color wheel. Since the wheel has 360 values and this parameter only has 255, the following equation can be used to determine the color: value/255 * 350 = Hue color wheel value | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 170 | 0 | 255 | No | No | No |
Value |
Description |
||||
| 0 | Color values | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 19 | 1 | Default LED Strip Intensity – Light | This is the intensity of the LED strip. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 5 | 0 | 9 | No | No | No |
Value |
Description |
||||
| 0 | Intensity of the LED strip | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 2 | 1 | Dimming Speed (From Switch) - Light | This changes the speed in which the attached light dims up or down when controlled from the physical switch. A setting of 0 should turn the light immediately on or off (almost like an on/off switch). Increasing the value should slow down the transition speed. A setting of 99 should keep this in sync with parameter 1. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 99 | 0 | 99 | No | No | No |
Value |
Description |
||||
| 0 | Speed at which light dims up and down (from switch) | ||||
| 99 | Sync to Parameter 1 | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 20 | 1 | Default LED Strip Color – Fan | This is the color of the Fan LED strip represented as part of the HUE color wheel. Since the wheel has 360 values and this parameter only has 255, the following equation can be used to determine the color: value/255 * 350 = Hue color wheel value | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 170 | 0 | 255 | No | No | No |
Value |
Description |
||||
| 0 | Color values | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 21 | 1 | Default LED Strip Intensity – Fan | This is the intensity of the fan LED strip. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 5 | 0 | 9 | No | No | No |
Value |
Description |
||||
| 0 | Intensity of the Fan LED strip | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 22 | 1 | Default LED Strip Intensity (When OFF) – Light | This is the intensity of the Light LED strip when the switch is off. This is useful for users to see the light switch location when the lights are off. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 0 | 9 | No | No | No |
Value |
Description |
||||
| 0 | Intensity of the Light LED strip (when lights are off) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 23 | 1 | Default LED Strip Intensity (When OFF) – Fan | This is the intensity of the Fan LED strip when the switch is off. This is useful for users to see the light switch location when the lights are off. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 0 | 9 | No | No | No |
Value |
Description |
||||
| 0 | Intensity of the Fan LED strip (when fan is off) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 24 | 4 | LED Strip Effect – Light | This will allow you to add some sweet effects to your LED Bar (i.e.: pulse, chase, solid, etc). Byte 1 = Color, Byte 2 = Brightness Level, Byte 3 = Effect, Byte 4 = Duration. *Please see website for further instructions on how to set this up | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 4294967295 | No | No | No |
Value |
Description |
||||
| 0 | Please see website instructions to set this up: https://nathanfiscus.github.io/inovelli-notification-calc/ | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 25 | 4 | LED Strip Effect – Fan | This will allow you to add some sweet effects to your LED Bar (i.e.: pulse, chase, solid, etc). Byte 1 = Color, Byte 2 = Brightness Level, Byte 3 = Effect, Byte 4 = Duration. *Please see website for further instructions on how to set this up | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 4294967295 | No | No | No |
Value |
Description |
||||
| 0 | Please see website instructions to set this up: https://nathanfiscus.github.io/inovelli-notification-calc/ | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 26 | 1 | Timeout for LED Bar – Light | When the LED strip is disabled (Light LED Strip Intensity is set to 0), this setting allows the LED strip to turn on temporarily while being adjusted. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 3 | 0 | 10 | No | No | No |
Value |
Description |
||||
| 0 | Disabled | ||||
| 1 | Intensity level | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 27 | 1 | Name: Timeout for LED Bar – Fan | When the LED strip is disabled (Fan LED Strip Intensity is set to 0), this setting allows the LED strip to turn on temporarily while being adjusted. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 3 | 0 | 10 | No | No | No |
Value |
Description |
||||
| 0 | Disabled | ||||
| 1 | Intensity Level | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 28 | 1 | Active Power Reports | The power level change that will result in a new power report being sent. The value is a percentage of the previous report. 0 = disabled. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 10 | 0 | 100 | No | No | No |
Value |
Description |
||||
| 0 | Disabled | ||||
| 1 | Percentage of the previous report | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 29 | 2 | Periodic Power & Energy Reports | Time period between consecutive power & energy reports being sent (in seconds). The timer is reset after each report is sent | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 3600 | 0 | 32767 | No | No | No |
Value |
Description |
||||
| 0 | Disabled | ||||
| 1 | Seconds | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 3 | 1 | Ramp Rate | This changes the speed in which the attached light turns on or off. For example, when a user sends the switch a basicSet(value: 0xFF) or basicSet(value: 0x00), this is the speed in which those actions take place. A setting of 0 should turn the light immediately on or off (almost like an on/off switch). Increasing the value should slow down the transition speed. A setting of 99 should keep this in sync with parameter 1. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 99 | 0 | 99 | No | No | No |
Value |
Description |
||||
| 1 | Speed at which the light turns on and off | ||||
| 99 | Sync to Parameter 1 | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 30 | 1 | Energy Reports | Energy level change which will result in sending a new energy report. Available settings: 1-127 (0.01-1.27 kWh) 0 = disabled. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 10 | 0 | 100 | No | No | No |
Value |
Description |
||||
| 0 | Disabled | ||||
| 1 | Percentage of the previous report | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 4 | 1 | Ramp Rate (From Switch) | This changes the speed in which the attached light turns on or off from the physical switch. For example, when a user presses the up or down button, this is the speed in which those actions take place. A setting of 0 should turn the light immediately on or off (almost like an on/off switch). Increasing the value should slow down the transition speed. A setting of 99 should keep this in sync with parameter 1. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 99 | 0 | 99 | No | No | No |
Value |
Description |
||||
| 0 | Speed at which the light turns on and off (from switch) | ||||
| 99 | Sync to Parameter 1 | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 5 | 1 | Minimum Level – Light | The minimum level that the dimmer allows the bulb to be dimmed to. Useful when the user has a bulb that does not turn on at a lower level. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 1 | 45 | No | No | No |
Value |
Description |
||||
| 1 | Minimum % level the bulb can be dimmed down to | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 6 | 1 | Maximum Level – Light | The maximum level that the dimmer allows the bulb to be dimmed to. Useful when the user has an LED bulb that reaches its maximum level before the dimmer value of 99. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 99 | 55 | 99 | No | No | No |
Value |
Description |
||||
| 55 | Maximum % level the bulb can be dimmed up to | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 7 | 1 | Minimum Level – Fan | The minimum level that the dimmer allows the fan to be dimmed to. Useful when the user has a fan that does not turn on at a lower level. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 1 | 45 | No | No | No |
Value |
Description |
||||
| 1 | Minimum % level the fan can be dimmed down to | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 8 | 1 | Name: Maximum Level – Fan | The maximum level that the dimmer allows the fan to be dimmed to. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 99 | 55 | 99 | No | No | No |
Value |
Description |
||||
| 55 | Maximum % level the fan can be dimmed up to | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 9 | 1 | Invert Switch | Inverts the switch (Tap Down = On, Tap Up = Off). 0 = Disabled, 1 = Enabled | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 1 | No | No | No |
Value |
Description |
||||
| 0 | Disabled | ||||
| 1 | Enabled | ||||