Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Model: Custos Ball Valve Servo (BVSZWE)

Z-Wave Certification Number: ZC12-21020179

Procedure	Instructions
Factory Reset Procedure	Factory Default Reset: To remove Custos BVS without involve gateway in Exclusion / Remove device operation and BVS will reset all setting to Factory Default Setting. i. Start: Long hold Touch Sense Button for 10 seconds then short click 5 times. ii. Processing: Yellow LED ON 1 second then wait 2-5 seconds. iii. Success: Green LED on 2 second with long beep sounds for 2 seconds. *Factory Default Reset will: a. Remote the BVS from Z-Wave Network; b. Delete the association setting; c. Restore the configuration settings to the default.
Classic Exclusion	Remove Custos BVS from Z-Wave Network: Set your Z-Wave Gateway into Exclusion mode / Remove device. i. Start: Short press Touch Sense Button 3 times. ii. Processing: Yellow LED and short beep sound keeping continue. iii. Success: Green LED on 1 second with 2 short beep sounds. iv. The LED indication Changes to Yellow LED blinking.
Other Special Features	None
Where to find S2 DSK on product	The DSK is printed on the product itself and also packaging label can be found outside the giftbox
Classic Inclusion	Classic Inclusion: Set your Z-Wave Gateway into Inclusion mode / Add device. i. Start: Short press Touch Sense Button 3 times. ii. Processing: Yellow LED and short beep sound keeping continue. For security inclusion support, you may need to entering first 5 digit that show on QR Code label, please refer to the instructions of central controller. iii. Success: Green LED on 1 second with 2 short beep sounds. iv. The LED indication changes to Green LED slow blinking from Yellow LED blinking.