TThere are thousands of interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 1 | 1 | State After Power Restored | 0 (Default) |
Off | |
| 1 | On | ||||
| 2 | Returns to level before Power Outage | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 2 | 1 | Notification when Load status change | 0 | The function is disabled | |
| 1 (Default) |
Send Switch Multilevel Report . | ||||
| 2 | Send Switch Multilevel Report only when Load status is not changed by Z-WAVE Command | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 3 | 1 | Default dimming speed | 0 | instantly | |
| 1 | fast | ||||
| 100 | slow | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 5 | 1 | Enable or Disable external switch to pair network | 0 | Disable | |
| 1 (Default) |
Enable | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 6 | 1 | Setting dimming way | 0 (Default) |
Linear dimming | |
| 1 | Logarithmic dimming | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 7 | 1 | Setting default brightness when turn on the dimmer from off status. | 0 (Default) |
the default brightness is 1% | |
| 1 to 99 | Default brightness percentage (where 99% = 100% brightness) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 8 | 1 | Setting delay time when turn off | 0 (Default) |
the light turns off immediately | |
| 1 to 60 | Amount of time in seconds after which the light turns off | ||||