TThere are thousands of interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 1 | 1 | Parameter no. 1 – Digital input type | 0 | Push-button | |
| 1 (Default) |
ON/OFF toggle switch | ||||
| 2 | Motion sensor | ||||
| 3 | Motion sensor with memory (turned off after certain amount of time defined in parameter 5) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 10 | 2 | Parameter no. 10 – Auto on timer | 0 (Default) |
disabled | |
| 30 to 32353 | 30 – 32535 seconds after which the device turns on | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 11 | 2 | Parameter no. 11 – Auto off timer | 0 | disabled | |
| 30 to 32535 (Default) |
30 – 32535 seconds after which the device turns off | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 3 | 1 | Parameter no. 3 – Turning off alarming | 0 | only by z-wave command (basic set, switch multilevel set, switch multilevel start/stop level change, sound switch play tone, sound switch configuration, switch color set, switch color start/stop level change, notification report idle) | |
| 1 (Default) |
capacitive input or z-wave command (basic set, switch multilevel set, switch multilevel start/stop level change, sound switch play tone, sound switch configuration, switch color set, switch color start/stop level change, notification report idle) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 30 | 1 | Parameter no. 30 – Restore state on power failure | 1 (Default) |
enabled (the device will restore state on power failure) | |
| 0 | – disabled (the device will not restore state on power failure and will remain off) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 5 | 2 | Parameter no. 5 – Motion sensor memory timer | 0 to 32534 (Default) |
0-32534 seconds after which the LED will be turned off. | |
| 32535 | never turns off | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Parameter Values |
||
| 50 | 1 | Parameter no. 50 – Beeper enable/disable | 0 | disabled (the beeper is not active) | |
| 1 (Default) |
enabled (the beeper is active) | ||||