There are over 4392 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 1 | 1 | Notification type | Select the notification type for the door and window open or close events. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 0 | 2 | No | No | No |
Bit (Value) |
Description |
||||
| 0 (1) | Binary sensor report + Notification report (Access Control) | ||||
| 1 (2) | Notification report (Access Control) | ||||
| 2 (4) | Notification report (Home Security) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 15 | 1 | Activate supervision | Activate Supervision command for only important alarm events or all events. Supervised commands require a confirmation from the gateway when a notification is received. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 0 | 2 | No | No | No |
Bit (Value) |
Description |
||||
| 0 (1) | Events sent with S2 Encapsulation only | ||||
| 1 (2) | Only Door Open Alarm Report (Events sent with S2 and supervision encapsulation) | ||||
| 2 (4) | Unsolicited reports (Door Open/Close, Tamper clear, Wake-up notification and Battery Report events sent with S2 and supervision encapsulation) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 16 | 2 | Supervision report wait time | Only used if parameter 22 is set to 1 (High security). The number of milliseconds to wait for a Supervision response when a Supervised message is sent. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 10000 | 500 | 30000 | No | No | Yes |
Value |
Description |
||||
| 500 | (ms) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 17 | 1 | No. of failed event retries | Only used if parameter 22 is set to 1 (High security). Number of retries when a confirmation is not received. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 0 | 5 | No | No | Yes |
Value |
Description |
||||
| 0 | 0 = No retry, 1 - 5 = Number of retries when a confirmation is not received. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 18 | 1 | Failed Event Retry Interval | Only used if parameter 22 is set to 1 (High security). The minimum number of seconds between retries. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 6 | 1 | 60 | No | No | Yes |
Value |
Description |
||||
| 1 | Min = 1 second, Max = 60 seconds | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 19 | 1 | Heartbeat interval | Only used if parameter 22 is set to 1 (High security). Number of minutes between periodic battery reports (Heartbeats). | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 70 | 5 | 70 | No | No | Yes |
Value |
Description |
||||
| 5 | (mins) - Accepts multiples of 5 mins. - Any arbitary value in between 5 and 70 will be rounded up to a multiple of 5 | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 2 | 1 | LED indication | Turn On or Off LED for specific event indications (ex. alarms). | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 0 | 1 | No | No | No |
Bit (Value) |
Description |
||||
| 0 (1) | Turns off LED for door open events | ||||
| 1 (2) | On | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 22 | 1 | Security Level | Select the level of security. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 1 | No | No | Yes |
Bit (Value) |
Description |
||||
| 0 (1) | : Standard (Forces parameter behaviour as follows: #16=1000, #17=Sensative standard**, #18=0, #19=Off, #21=Off ** Retries with an incrementally longer period until reconnected | ||||
| 1 (2) | : High Security (Enables parameters 16-19, 21) | ||||