Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Model: ISY-994 Zigbee/Z-Wave/Pro (ISY-994 ZW+/ZS Pro)

Z-Wave Certification Number: ZC10-20106987

Procedure	Instructions
Controller Classic Inclusion	Set Z-Wave \| Options \| Use Network Wide Search when adding or removing Z-Wave devices (NWI/NWE) to enable or disable NWI/NWE when adding or removing devices. 1. Select Z-Wave \| Add a Z-Wave Device and wait for a popup window to appear. - If the popup window does not appear, Select Z-Wave \| Advanced \| Stop Adding or Removing a Z-Wave Device then try again. 2. Put the Z-Wave device you are adding into learn Mode. Refer to the user guide for your product on how to do this. In many cases this just requires you to press a button on the device. 3. The ISY will begin adding the device (this may occur a few seconds after you put the device into learn mode). - The popup window will go away and you will see your device added to the tree. Note: To add a device, it must not already be in a Z-Wave network. Therefore, if you are having trouble adding a device try removing it first.
Controller Classic Exclusion	1. Select Z-Wave \| Remove a Z-Wave Device and wait for a popup window to appear. - If the popup window does not appear, Select Z-Wave \| Advanced \| Stop Adding or Removing a Z-Wave Device then try again. 2. Put the Z-Wave device into learn Mode. Refer to the user guide for your product on how to do this. In many cases this just requires you to press a button on the device. 3. The ISY will remove the device (this may occur a few seconds after you put the device intolearn mode). - The popup window will go away and the nodes for the device will be removed from the tree.
Controller Learn Mode	1. Select Z-Wave \| Learn Mode and wait for a popup window to appear. - If the popup window does not appear, Select Z-Wave \| Advanced \| Stop Adding or Removing a Z-Wave Device then try again. 2. The ISY will now wait to receive information from another Z-Wave device performing an action such as Add, Remove, etc. - The popup window will go away when the operation is complete. - In some cases this may take 30 to 60 seconds or longer to complete. Note: Learn Mode is only available if the Z-Wave network is empty or the ISY is not the SIS for the Z-Wave network.
Controller Replication	1. Select Z-Wave \| Add a Z-Wave Device and wait for a popup window to appear. - If the popup window does not appear, Select Z-Wave \| Advanced \| Stop Adding or Removing a Z-Wave Device then try again. 2. Put the other controller into Learn Mode. Refer to the user guide for your product on how to do this. 3. The ISY will begin updating the other controller
Factory Reset Procedure	When the Z-Wave dongle in the ISY is factory reset it is also given a new Home Id and new S0 security keys are generated. To factory reset the Z-Wave dongle, select Z-Wave \| Advanced \| Factory Reset Z-Wave Dongle If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.