Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Model: Elan System Controller (EL-SC-100)

Z-Wave Certification Number: ZC12-20120148

Procedure	Instructions
Where to find S2 DSK on product	Products are professionally installed. During configuration the UI will present the DSK information.
Controller Classic Inclusion	1. Navigation to the Communication Device: ELAN Z-Wave Network page under Security, Climate, Lighting or Input/Output Tabs in Configurator 2. Set Management View: Network Management 3. Set Network Action: Include 4. Put device in Inclusion/Learn mode per manufacturer instruction Execute (button to right of Network action)
Controller Classic Exclusion	1. Navigation to the Communication Device: ELAN Z-Wave Network page under Security, Climate, Lighting or Input/Output Tabs in Configurator 2. Management View: Network Management 3. Network Action: Exclude 4. Put device in Exclusion/Learn mode per manufacturer instruction 5. Execute (button to right of Network action)
Controller Provisioning List	1. Navigation to the Communication Device: ELAN Z-Wave Network page under Security, Climate, Lighting or Input/Output Tabs in Configurator 2. Management View: Network Provisioning. 3. Network Action: Remove Device – This action removes the device only form the provisioning list & not from Z-wave network. 4. Network Action: Clear List – This action removes all the devices only form the provisioning list & not from Z-wave network.
Controller Replication	Replication of network information from the controller to another controller is not supported.
Controller Learn Mode	1. Navigation to the Communication Device: ELAN Z-Wave Network page under Security, Climate, Lighting or Input/Output Tabs in Configurator 2. Management View: Network Management 3. Network Action: Learn 4. Put other controller in Add/Include mode per manufacturer instruction 5. Execute (button to right of Network action)
Capability Rediscovery	1. Navigation to the Communication Device: ELAN Z-Wave Network page under Security, Climate, Lighting or Input/Output Tabs in Configurator 2. Management View: Network Management 3. Node Action: Request Info 4. Select desired Node ID in the Devices list 5. Execute (button to right of Node action)
Factory Reset Procedure	1. Navigation to the Communication Device: ELAN Z-Wave Network page under Security, Climate, Lighting or Input/Output Tabs in Configurator 2. Management View: Network Management 3. Network Action: Reset 4. Execute (button to right of Network action)
Controller SmartStart Inclusion	1. Navigation to the Communication Device: ELAN Z-Wave Network page under Security, Climate, Lighting or Input/Output Tabs in Configurator 2. Management View: Network Provisioning. 3. Refer device documentation / manufacturer instruction for Z-wave DSK of the device. 4. Put device full DSK string in Device DSK text box & click Append. 5. Click on “ Add device to List “ button. 6. Click on “Discover Devices button” at the bottom. 7. Power on the end device or any other mechanism to start smart start in the device to be added into SC100 network. Refer manufacturer instruction.