Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Model: ONU Integrated Service Router (NSD-G3000T)

Z-Wave Certification Number: ZC12-21010164

Procedure	Instructions
Classic Inclusion	To add a device to the Z-Wave network, press the “Inclusion” button in the Android Controller Application.
Classic Exclusion	To remove a device from the Z-Wave network, press the “Exclusion” button in the Android Controller Application.
Where to find S2 DSK on product	As the camera starts, hold it over the QR code. Register or Unregister the DSK when you correctly hold the camera over a QR code on product label. (Full DSK is printed on a gift box) QR code is on a product label in a PON Cover. Since the QR code is written on the inside of the PON cover, it is protected from the wonders of rubbing and dirt.
Factory Reset Procedure	Press “RESET” in the Factory Default Reset dialog. This will reset the Z- Wave chip, and the gateway will show “DEVICE RESET LOCALLY NOTIFICATION” after the restart.
Controller SmartStart Inclusion	Press “Add” to display the camera screen. As the camera starts, hold it over the QR code. Register the DSK when you correctly hold the camera over a QR code on the product label.
Controller Classic Inclusion	To add a device to the Z-Wave network, press the “Inclusion” button in the Android Controller Application.
Controller Classic Exclusion	To remove a device from the Z-Wave network, press the “Exclusion” button in the Android Controller Application.
Controller Learn Mode	To add an IoT gateway into another Z-Wave network as a secondary controller or inclusion controller, press “Learn Mode Classic” or “Learn Mode NWI” in the Settings dialog.
Controller Replication	In the event that the gateway is already the controller of the Z-Wave network, put the gateway into Inclusion Mode, and put another controller into the Learn Mode. The Replication will begin and network information will be sent to another controller. In the event that the gateway is integrated into an existing Z-Wave network, put the gateway into Learn Mode, and put the existing controller into Inclusion Mode. The Replication will begin and network information will be received from the existing controller.
Controller Provisioning List	Access When tapping the Setting button, a Settings dialog will be displayed. Show Provisioning List Edit Display the registered provisioning list (DSK and inclusion status). Press an item in the list to delete it.