TThere are thousands of interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
1 | 2 | Heartbeat rate [min] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
60 | 1 | 1440 | No | No | No |
Value |
Description |
||||
1 | Value tells at what interval [min] Heartbeat will be sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
10 | 2 | DI 5 send enable | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 2 | No | No | No |
Value |
Description |
||||
0 | Notifications for DI 5 are disabled | ||||
1 | Binary Sensor Report for DI 5 is enabled | ||||
2 | Central Scene Report for DI 5 is enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
11 | 2 | DI 5 send interval [min] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
50 | 1 | 1200 | No | No | No |
Value |
Description |
||||
1 | Value tells at what interval [0.1min] notification for DI 5 will we sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
12 | 2 | DI 6 send enable | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 2 | No | No | No |
Value |
Description |
||||
0 | Notifications for DI 6 are disabled | ||||
1 | Binary Sensor Report for DI 6 is enabled | ||||
2 | Central Scene Report for DI 6 is enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
13 | 2 | DI 6 send interval [min] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
50 | 1 | 1200 | No | No | No |
Value |
Description |
||||
1 | Value tells at what interval [0.1min] notification for DI 6 will we sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
14 | 2 | AI 1 send enable | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 1 | No | No | No |
Value |
Description |
||||
0 | Sending AI 1 values disabled | ||||
1 | Sending AI 1 values enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
15 | 2 | AI 1 sensor select | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 5 | No | No | No |
Value |
Description |
||||
0 | Configure AI 1 for NTC 5k Ohm thermistor | ||||
1 | Configure AI 1 for NTC 10k Ohm thermistor | ||||
2 | Configure AI 1 for PTC 1k Ohm thermistor | ||||
3 | Configure AI 1 for PT1000 thermistor | ||||
4 | Configure AI 1 for 0 - 10V sensor | ||||
5 | Configure AI 1 for digital input | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
16 | 2 | AI 1 send interval [min] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
50 | 1 | 1200 | No | No | No |
Value |
Description |
||||
1 | Value tells at what interval [0.1min] sensor values for AI 1 will be sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
17 | 2 | AI 1 send delta temp [K] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
5 | 1 | 100 | No | No | No |
From |
To |
Description |
|||
1 | 100 | Value tells at what temperature difference [0.1K]for AI 1 will be sent | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
18 | 2 | AI 1 send delta volt [V] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
5 | 1 | 100 | No | No | No |
Value |
Description |
||||
1 | Value tells at what voltage difference [0.1V]for AI 1 will be sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
19 | 2 | AI 2 send enable | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 1 | No | No | No |
Value |
Description |
||||
0 | Sending AI 2 values disabled | ||||
1 | Sending AI 2 values enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
2 | 2 | DI 1 send enable | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 2 | No | No | No |
Value |
Description |
||||
0 | Notifications for DI 1 are disabled | ||||
1 | Binary Sensor Report for DI 1 is enabled | ||||
2 | Central Scene Report for DI 1 is enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
20 | 2 | AI 2 sensor select | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 5 | No | No | No |
Value |
Description |
||||
0 | Configure AI 2 for NTC 5k Ohm thermistor | ||||
1 | Configure AI 2 for NTC 10k Ohm thermistor | ||||
2 | Configure AI 2 for PTC 1k Ohm thermistor | ||||
3 | Configure AI 2 for PT1000 thermistor | ||||
4 | Configure AI 2 for 0 - 10V sensor | ||||
5 | Configure AI 2 for digital input | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
21 | 2 | AI 2 send interval [min] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
50 | 1 | 1200 | No | No | No |
Value |
Description |
||||
1 | Value tells at what interval [0.1min] sensor values for AI 2 will be sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
22 | 2 | AI 2 send delta temp [K] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
5 | 1 | 100 | No | No | No |
From |
To |
Description |
|||
1 | 100 | Value tells at what temperature difference [0.1K]for AI 2 will be sent | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
23 | 2 | AI 2 send delta volt [V] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
5 | 1 | 100 | No | No | No |
Value |
Description |
||||
1 | Value tells at what voltage difference [0.1V]for AI 2 will be sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
24 | 2 | AI 3 send enable | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 1 | No | No | No |
Value |
Description |
||||
0 | Sending AI 3 values disabled | ||||
1 | Sending AI 3 values enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
25 | 2 | AI 3 sensor select | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 5 | No | No | No |
Value |
Description |
||||
0 | Configure AI 3 for NTC 5k Ohm thermistor | ||||
1 | Configure AI 3 for NTC 10k Ohm thermistor | ||||
2 | Configure AI 3 for PTC 1k Ohm thermistor | ||||
3 | Configure AI 3 for PT1000 thermistor | ||||
4 | Configure AI 3 for 0 - 10V sensor | ||||
5 | Configure AI 3 for digital input | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
26 | 2 | AI 3 send interval [min] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
50 | 1 | 1200 | No | No | No |
Value |
Description |
||||
1 | Value tells at what interval [0.1min] sensor values for AI 3 will be sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
27 | 2 | AI 3 send delta temp [K] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
5 | 1 | 100 | No | No | No |
From |
To |
Description |
|||
1 | 100 | Value tells at what temperature difference [0.1K]for AI 3 will be sent | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
28 | 2 | AI 3 send delta volt [V] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
5 | 1 | 100 | No | No | No |
Value |
Description |
||||
1 | Value tells at what voltage difference [0.1V]for AI 3 will be sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
29 | 2 | AI 4 send enable | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 1 | No | No | No |
Value |
Description |
||||
0 | Sending AI 4 values disabled | ||||
1 | Sending AI 4 values enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
3 | 2 | DI 1 send interval [min] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
50 | 1 | 1200 | No | No | No |
Value |
Description |
||||
1 | Value tells at what interval [0.1min] notification for DI 1 will we sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
30 | 2 | AI 4 sensor select | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 5 | No | No | No |
Value |
Description |
||||
0 | Configure AI 4 for NTC 5k Ohm thermistor | ||||
1 | Configure AI 4 for NTC 10k Ohm thermistor | ||||
2 | Configure AI 4 for PTC 1k Ohm thermistor | ||||
3 | Configure AI 4 for PT1000 thermistor | ||||
4 | Configure AI 4 for 0 - 10V sensor | ||||
5 | Configure AI 4 for digital input | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
31 | 2 | AI 4 send interval [min] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
50 | 1 | 1200 | No | No | No |
Value |
Description |
||||
1 | Value tells at what interval [0.1min] sensor values for AI 4 will be sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
32 | 2 | AI 4 send delta temp [K] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
5 | 1 | 100 | No | No | No |
From |
To |
Description |
|||
1 | 100 | Value tells at what temperature difference [0.1K]for AI 4 will be sent | |||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
33 | 2 | AI 4 send delta volt [V] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
5 | 1 | 100 | No | No | No |
Value |
Description |
||||
1 | Value tells at what voltage difference [0.1V]for AI 4 will be sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
4 | 2 | DI 2 send enable | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 2 | No | No | No |
Value |
Description |
||||
0 | Notifications for DI 2 are disabled | ||||
1 | Binary Sensor Report for DI 2 is enabled | ||||
2 | Central Scene Report for DI 2 is enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
5 | 2 | DI 2 send interval [min] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
50 | 1 | 1200 | No | No | No |
Value |
Description |
||||
1 | Value tells at what interval [0.1min] notification for DI 2 will we sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
6 | 2 | DI 3 send enable | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 2 | No | No | No |
Value |
Description |
||||
0 | Notifications for DI 3 are disabled | ||||
1 | Binary Sensor Report for DI 3 is enabled | ||||
2 | Central Scene Report for DI 3 is enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
7 | 2 | DI 3 send interval[min] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
50 | 1 | 1200 | No | No | No |
Value |
Description |
||||
1 | Value tells at what interval [0.1min] notification for DI 3 will we sent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
8 | 2 | DI 4 send enable | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 2 | No | No | No |
Value |
Description |
||||
0 | Notifications for DI 4 are disabled | ||||
1 | Binary Sensor Report for DI 4 is enabled | ||||
2 | Central Scene Report for DI 4 is enabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
9 | 2 | DI 4 send interval [min] | see manual | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
50 | 1 | 1200 | No | No | No |
Value |
Description |
||||
1 | Value tells at what interval [0.1min] notification for DI 4 will we sent | ||||