There are over 4401 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
1 | 2 | Heartbeat rate | A heartbeat notification is sent at this rate | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
60 | 1 | 1440 | No | No | No |
Value |
Description |
||||
1 | Heartbeat rate [min] | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
2 | 2 | Full distance down drive time | Time the blind uses to drive from upper end position to the lower end position. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 30000 | Yes | No | No |
Value |
Description |
||||
0 | Full distance down drive time [0.01s] | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
3 | 2 | Full distance up drive time | Time the blind uses to drive from lower end position to the upper end position. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 30000 | Yes | No | No |
Value |
Description |
||||
0 | Full distance up drive time [0.01s] | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
4 | 2 | Time to move slat between horizontal and vertivcal | Time to move slat between horizontal and vertivcal | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
120 | 0 | 500 | No | No | No |
Value |
Description |
||||
0 | Slat move time [0.01s] | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
5 | 2 | Start position calibration | Start a positioning calibration. Used to start to measure time used by blind to move from one end position to the other. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 1 | No | No | No |
Value |
Description |
||||
0 | Position calibration is inactive / has ended | ||||
1 | Start Position calibration / position calibration is active | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
6 | 2 | Invert outputs | Normaly output 1 is used to drive blind upwards and output 2 to drive it downwards. When parameter is set to 1 output 1 drives blind downwards and output 2 upwards. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 1 | No | No | No |
Value |
Description |
||||
0 | Normal assignment of outputs | ||||
1 | Inverted assignment of outputs | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
7 | 2 | Min off time of outputs | When blind should change direction while running, the time defined in this parameter is used between stopping active direction output and starting oposite direction output. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
10 | 10 | 50 | No | No | No |
Value |
Description |
||||
10 | Minimum off time of one output before turning on other one [0.01s] | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
8 | 2 | Key assignment local control | Digital inputs and Touch add-on may be used to control blinds locally. Different key pairs can be assigned to control blind to move up or down resp. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
0 | 0 | 6 | No | No | No |
Value |
Description |
||||
0 | Locol control of blinds disabled | ||||
1 | Input 1 --> up, input 2 --> down | ||||
2 | Input 1 --> down, input 2 --> up | ||||
3 | Touch 2 --> up, touch 4 --> down | ||||
4 | Touch 3 --> up, touch 5 --> down | ||||
5 | Touch 2 --> left, touch 3 --> right | ||||
6 | Touch 4 --> left, touch 5 --> right | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
9 | 2 | Key hold time to move to end position | When key is hold shorter time than parameter value, movement stops, when key is released. If key is hold longer than parameter value, blind moves until reaching end position also when key is released. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
20 | 0 | 50 | No | No | No |
Value |
Description |
||||
0 | Key hold time to move to end position [0.1s] | ||||