Z-Wave Products

There are over 4042 interoperable Z-Wave products throughout the world, and over 94 million Z-Wave products have been sold since our beginnings in 2001. All of them work together regardless of brand, because they're all based on the common Z - Wavestandard.Browse our Product Finder to see what Z -Wave can do for you.

Z-Wave Configuration Capabilities

Model: Strips Drip 700 (11 04 021)

Z-Wave Certification Number: ZC12-21010156


Parameter Number

Parameter Size

Parameter Name

Description

12 1 Leakage/Moisture alarm Turn the Leakage Alarm to On or Off

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 0 1 No No No

Bit (Value)

 

Description

0 (1)   Off
1 (2)   On

Parameter Number

Parameter Size

Parameter Name

Description

13 1 Leakage/Moisture alarm level Set the trigger level at which the Leakage Alarm Notification Report will be sent

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

10 1 100 No No No

From

 

To

Description

1   100 (1: Almost Dry, 100: Wet)

Parameter Number

Parameter Size

Parameter Name

Description

14 1 Leakage/Moisture reporting period Select the number of hours between moisture reports. Report values between -100 to 100

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 120 No No No

From

 

To

Description

0   120 Hours (Hours between reports). Default: 0 = Off

Parameter Number

Parameter Size

Parameter Name

Description

15 1 Activate supervision Activate Supervision command for only important alarm events or all events. *Supervised commands require a confirmation from the gateway when a notification is received

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 0 2 No No No

Bit (Value)

 

Description

0 (1)   Off
1 (2)   Alarm Report (*Only for alarm events e.g. Leakage alarm)
2 (4)   All Reports

Parameter Number

Parameter Size

Parameter Name

Description

2 1 LED alarm event reporting Turn On or Off LED for specific event indications (ex. alarms).

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 0 1 No No No

Bit (Value)

 

Description

0 (1)   Off
1 (2)   On

Parameter Number

Parameter Size

Parameter Name

Description

20 1 Wake-Up moisture polling workaround for Fibaro G Turn On or Off Moisture reporting during polling (applicable only for Fibaro gateway users)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 No No Yes

Bit (Value)

 

Description

0 (1)   Off
1 (2)   On

Parameter Number

Parameter Size

Parameter Name

Description

23 1 Perform leakage/moisture sensor calibration Should be performed when Drip is mounted correctly and absolutely dry to calibrate the \"zero-level\". A Multilevel Sensor Report with the Moisture value is sent after calibration is performed

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 No No No

Bit (Value)

 

Description

0 (1)   Device resets to this value after performing capacitance calibration and sends a report with value 0 to the gateway (as recommended by Z-Wave Specifications.)
1 (2)   Perform Calibration

Parameter Number

Parameter Size

Parameter Name

Description

24 1 Temperature offset The offset value is used to calibrate temperature reports in the actual temperature.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 -100 100 No No No

From

 

To

Description

-100   100 [=-10.0 to +10.0 (Degree C)]

Parameter Number

Parameter Size

Parameter Name

Description

25 2 Temperature reporting period Select the number of minutes between the temperature reports (15 minutes to 24 hours) (used for parameter 4)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1440 15 1440 No No No

Value

 

Description

15   (minutes between reports)

Parameter Number

Parameter Size

Parameter Name

Description

26 1 Temperature Delta A new temperature report is sent when the temperature has changed more than the delta value. Input value converted to one decimal place

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

20 5 100 No No No

Value

 

Description

5   [=0.5 to 10.0 (Degree C)], Default: 20 (= 2.0 Degree C)

Parameter Number

Parameter Size

Parameter Name

Description

27 1 Temperature hysteresis for temperature alarms Triggers alarm clear reports (see parameters 7 & 8). Input value converted to one decimal place

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

20 5 100 No No Yes

Value

 

Description

5   [=0.5 to 10.0 (Degree C)], Default: 20 (= 2.0 Degree C)

Parameter Number

Parameter Size

Parameter Name

Description

4 1 Temperature reporting type Turn On or Off temperature sensor value reporting (does not affect temperature alarms)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 3 No No No

Bit (Value)

 

Description

0 (1)   Off
1 (2)   On. Reports the actual value when the temperature is changed according to parameter 26 since the last report or at least according to the reporting period set in the config parameter 25.
2 (4)   On. Reports the actual value periodically based on the config parameter 25.
3 (8)   On. The average temperature during the period is sent periodically during every wake up interval.

Parameter Number

Parameter Size

Parameter Name

Description

5 1 Temperature reporting unit Select the temperature unit

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 No No No

Bit (Value)

 

Description

0 (1)   Celsius
1 (2)   Fahrenheit

Parameter Number

Parameter Size

Parameter Name

Description

6 1 Temperature alarms Turn On or Off the temperature alarm

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 No No No

Bit (Value)

 

Description

0 (1)   Off
1 (2)   On

Parameter Number

Parameter Size

Parameter Name

Description

7 1 High temperature alarm level Select a high temperature alarm level

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

40 -20 80 No No No

From

 

To

Description

-20   80 (Degree C)

Parameter Number

Parameter Size

Parameter Name

Description

8 1 Low temperature alarm level Select a low temperature alarm level

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

5 -20 60 No No No

From

 

To

Description

-20   60 (Degree C)