TThere are thousands of interoperable
| Group ID | Group Profile Name | Profile | Maximum Nodes | Description | Endpoint ID | Commands |
|---|---|---|---|---|---|---|
| 1 | Lifeline | 0x0001 | 1 | Supports following commands: COMMAND_CLASS_DEVICE_RESET_LOCALLY, DEVICE_RESET_LOCALLY_NOTIFICATION - triggered upon reset, COMMAND_CLASS_SWITCH_MULTILEVEL_V4, SWITCH_MULTILEVEL_REPORT_V4 - triggered upon change of brightness, COMMAND_CLASS_SWITCH_COLOR_V3, SWITCH_COLOR_REPORT_V3 - triggered upon change of color, COMMAND_CLASS_NOTIFICATION_V8, NOTIFICATION_REPORT_V8 - triggered upon change of alarm detection state or upon current overload detection, COMMAND_CLASS_SWITCH_BINARY, SWITCH_BINARY_REPORT - is triggered when a change of output state of relay occurs. COMMAND_CLASS_METER, METER_REPORT - triggered upon energy consumption change according to configuration parameters 40 and 42. CONFIGURATION_REPORT – triggered upon a local change of the working mode of the four capacitive buttons (see chapter 5.4) Reserved for communication with the primary gateway/hub. Used to report unsolicited messages to the controller. | 0 | |
| 2 | LEDs on/off | 0x0002 | 5 | Supports the following command: COMMAND_CLASS_BASIC_V2, BASIC_SET_V2 - is triggered when a change of output state occurs; LEDs are on/off. | 0 | |
| 3 | Change of brightness | 0x0003 | 5 | Supports the following command: COMMAND_CLASS_SWITCH_MULTILEVEL_V4, SWITCH_MULTILEVEL_SET_V4 - is triggered when a change of output state occurs; brightness changes. | 0 | |
| 4 | Change of color | 0x0004 | 5 | Supports the following command: COMMAND_CLASS_SWITCH_COLOR_V3, SWITCH_COLOR_SET_V3 - is triggered when a change of output state occurs; colour changes. | 0 | |
| 5 | Relay on/off | 0x0005 | 5 | Supports the following command: COMMAND_CLASS_BASIC_V2, BASIC_SET_V2 - is triggered when a change of output state of relay occurs. | 0 |