Z-Wave Products

There are over 4042 interoperable Z-Wave products throughout the world, and over 94 million Z-Wave products have been sold since our beginnings in 2001. All of them work together regardless of brand, because they're all based on the common Z - Wavestandard.Browse our Product Finder to see what Z -Wave can do for you.

Z-Wave Configuration Capabilities

Model: MultiSensor 7 (ZWA024-A)

Z-Wave Certification Number: ZC12-21080291


Parameter Number

Parameter Size

Parameter Name

Description

1 1 Beaming Enable/Disable Used to enable/disable beaming. If set to 1, FLiR commands will be supported. But the device must be re-included into the network to activate it. 0 - disable 1 - enable

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 0 1 No No No

Bit (Value)

 

Description

0 (1)   Disable
1 (2)   Enable

Parameter Number

Parameter Size

Parameter Name

Description

10 1 Power Status This value is Readonly. Used to report the power status (USB or Battery powered) 0 - When battery powered, the device will act as RSS. 1 - When USB cable insert, the device will act as LSS. The device must be re-included in the network to change the role type.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 Yes No No

Bit (Value)

 

Description

0 (1)   When battery powered, the device will act as RSS.
1 (2)   When USB cable insert, the device will act as LSS.

Parameter Number

Parameter Size

Parameter Name

Description

101 1 Automatic Report Checklist 1 Checklist 1 for automatic timed report. When the corresponding item is selected, it will be checked when timeout setting by Param111. 1 - Battery 16 - UV 32 - Temperature 64 - Humidity 128 - Lux

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

241 0 241 No No No

Parameter Number

Parameter Size

Parameter Name

Description

102 1 Automatic Report Checklist 2 Checklist 2 for automatic timed report. When the corresponding item is selected, it will be checked when timeout setting by Param112. 1 - Battery 16 - 32 - Temperature 64 - Humidity 128 - Lux

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 241 No No No

Parameter Number

Parameter Size

Parameter Name

Description

103 1 Automatic Report Checklist 3 Checklist 3 for automatic timed report. When the corresponding item is selected, it will be checked when timeout setting by Param113. 1 - Battery 16 - UV 32 - Temperature 64 - Humidity 128 - Lux

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 241 No No No

Parameter Number

Parameter Size

Parameter Name

Description

11 1 Motion Group Control(Group2) Set control of other devices on group2 based on motion trigger. 0 - Send BASIC_SET (0xFF) when motion is triggered to associated device Send BASIC_SET (0x00) when motion is untriggered to associated device 1 - Send BASIC_SET (0x00) when motion is triggered Send BASIC_SET (0xFF) when motion is untriggered 2 - Send BASIC_SET (0xFF) when motion is triggered, Nothing when motion untriggered. 3 - Send BASIC_SET (0x00) when motion is triggered, Nothing when motion untriggered. 4 - Send BASIC_SET (0x00) when motion is untriggered, Nothing when motion triggered. 5 - Send BASIC_SET (0xFF) when motion is untriggered, Nothing when motion triggered. 6 - Send BASIC_SET (value is configured by parameter 12) when motion is triggered to associated devices. Send BASIC_SET (value is configured by parameter 12) when motion is untriggered.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 6 No No No

Bit (Value)

 

Description

0 (1)   Send BASIC_SET (0xFF) when motion is triggered to associated device Send BASIC_SET (0x00) when motion is untriggered to associated device
1 (2)   Send BASIC_SET (0x00) when motion is triggered Send BASIC_SET (0xFF) when motion is untriggered
2 (4)   Send BASIC_SET (0xFF) when motion is triggered, Nothing when motion untriggered.
3 (8)   Send BASIC_SET (0x00) when motion is triggered, Nothing when motion untriggered.
4 (16)   Send BASIC_SET (0x00) when motion is untriggered, Nothing when motion triggered.
5 (32)   Send BASIC_SET (0xFF) when motion is untriggered, Nothing when motion triggered.
6 (64)   Send BASIC_SET (value is configured by parameter 12) when motion is triggered to associated devices. Send BASIC_SET (value is configured by parameter 12) when motion is untriggered.

Parameter Number

Parameter Size

Parameter Name

Description

111 2 Automatic Checklist 1 Interval Time Interval time set in seconds to check the checklist1’s items. Multilevel Sensor Report will be sent when timeout.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

3600 30 65535 No No No

Value

 

Description

30   Interval time set in seconds

Parameter Number

Parameter Size

Parameter Name

Description

112 2 Automatic Checklist 2 Interval Time Interval time set in seconds to check the checklist2’s items. Multilevel Sensor Report will be sent when timeout.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

3600 30 65535 No No No

Value

 

Description

30   Interval time set in seconds

Parameter Number

Parameter Size

Parameter Name

Description

113 2 Automatic Checklist 3 Interval Time Interval time set in seconds to check the checklist3’s items. Multilevel Sensor Report will be sent when timeout.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

3600 30 65535 No No No

Value

 

Description

30   Interval time set in seconds

Parameter Number

Parameter Size

Parameter Name

Description

12 2 Motion Group Value Setting Set Basic Set value for Group2. The MSB will act as the basic set value when motion trigger. The LSB will act as the basic set value when motion untrigger. E.g. value=0x0A00, then BASIC_SET(0x0A) will be sent when motion trigger, BASIC_SET(0x00) will be sent when motion untrigger.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

65280 0 65535 No No No

Value

 

Description

0   Set Basic Set value for Group2.

Parameter Number

Parameter Size

Parameter Name

Description

13 2 Motion Group Control Requirement Set threshold of Light/Lux when devices associated in group2 should be triggered by motion. Associated device only receive BASIC_SET command when light

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

30000 0 30000 No No No

Value

 

Description

0   Set threshold of Light/Lux

Parameter Number

Parameter Size

Parameter Name

Description

14 1 Over Humidity Group Threshold (Group5) Set threshold of humidity. If measured humidity >= (this value), send BASIC_SET (0xFF) to associated devices through group5. If measured humidity < (this value) send BASIC_SET (0x00) to associated devices through group5.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

60 0 100 No No No

Value

 

Description

0   Set threshold of humidity.

Parameter Number

Parameter Size

Parameter Name

Description

15 1 Under Humidity Group Threshold (Group6) Set threshold of humidity. If measure humidity (this value) send BASIC_SET (0x00) to associated devices through group6.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

40 0 100 No No No

Value

 

Description

0   Set threshold of humidity.

Parameter Number

Parameter Size

Parameter Name

Description

16 2 Over Heat Group Threshold (Group3) Set threshold of temperature. Designed to control Air Conditioners or temperature controllers ON or OFF. If measured temperature >= (this value, Scale is determined by Param64) send BASIC_SET (0xFF) to associated devices. If measured temperature<(this value) send BASIC_SET (0x00) to associated devices. E.g. Value 239 means 23.9 C. Value 750 means 75.0 F.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

239 -400 850 No No No

From

 

To

Description

-400   850 Set threshold of temperature

Parameter Number

Parameter Size

Parameter Name

Description

17 2 Under Heat Group Threshold (Group4) Set threshold of temperature. Designed to control Air Conditioners or temperature controllers ON or OFF. If measured temperature (this value) send BASIC_SET (0x00) to associated devices. E.g. Value 155 means 15.5 C. Value 600 means 60.0 F.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

155 -400 850 No No No

From

 

To

Description

-400   850 Set threshold of temperature

Parameter Number

Parameter Size

Parameter Name

Description

18 2 Over Light Group Threshold (Group7) Set threshold of Light/Lux. If measured light/lux >= (this value) send BASIC_SET (0xFF) to associated devices. If measured light/lux < (this value) send BASIC_SET (0x00) to associated devices.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

2000 0 30000 No No No

Value

 

Description

0   Set threshold of Light/Lux.

Parameter Number

Parameter Size

Parameter Name

Description

19 2 Under Light Group Threshold (Group8) Set threshold of Light/Lux. If measured light/lux (this value) send BASIC_SET (0x00) to associated devices.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

100 0 30000 No No No

Value

 

Description

0   Set threshold of Light/Lux.

Parameter Number

Parameter Size

Parameter Name

Description

2 2 Motion Retrigger Time Presence re-detection time set in second to allow motion sensor to reset timeout of motion sensor. In this time, the motion sensor can not be triggered again. If this value reach zero, the timeout configuration value set by Param3 will be reset. This setting value must always be less than timeout configuration. 0 - disable 1~3600 - timeout set in seconds

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

30 30 3600 No No No

Value

 

Description

30   timeout set in seconds

Parameter Number

Parameter Size

Parameter Name

Description

20 1 Over UV Group Threshold (Group9) Set threshold of UV. If measured UV >= (this value) send BASIC_SET (0xFF) to associated devices. If measured UV < (this value) send BASIC_SET (0x00) to associated devices.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

8 0 11 No No No

Bit (Value)

 

Description

0 (1)   Set threshold of UV.

Parameter Number

Parameter Size

Parameter Name

Description

201 2 Temperature Offset Value Can add or minus this setting value to calibrate temperature when checked. Scale is defined by Param64. e.g. Value 15 means 1.5C or 1.5F.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 -200 200 No No No

From

 

To

Description

-200   200 Temperature Offset Value

Parameter Number

Parameter Size

Parameter Name

Description

202 1 Humidity Offset Value Can add or minus this setting value to calibrate humidity when checked. Unit: %.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 -100 100 No No No

From

 

To

Description

-100   100 Humidity Offset Value

Parameter Number

Parameter Size

Parameter Name

Description

203 2 Lux Offset Value Can add or minus this setting value to calibrate Lux when checked.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 -10000 10000 No No No

From

 

To

Description

-10000   10000 Lux Offset Value

Parameter Number

Parameter Size

Parameter Name

Description

204 1 UV Offset Value Can add or minus this setting value to calibrate UV when checked.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 -10 10 No No No

From

 

To

Description

-10   10 Offset Value range -10-10.

Parameter Number

Parameter Size

Parameter Name

Description

21 1 Under UV Group Threshold (Group10) Set threshold of UV. If measured UV (this value) send BASIC_SET (0x00 to associated devices.)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 0 11 No No No

Value

 

Description

0   Set threshold of UV.

Parameter Number

Parameter Size

Parameter Name

Description

3 2 Motion Untrigger Time Timeout configuration set in second for motion sensor to send no trigger status.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

240 30 3600 No No No

Value

 

Description

30   timeout set in seconds

Parameter Number

Parameter Size

Parameter Name

Description

39 1 Low Battery Threshold Configure low battery report threshold, sends low battery report via notification and battery report when battery level drops under setting. Unit %.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

50 10 90 No No No

Value

 

Description

10   Configure low battery report threshold

Parameter Number

Parameter Size

Parameter Name

Description

4 1 Motion Sensitivity Set the sensitivity of motion sensor. 0 - disable 1- minimum sensitivity 11 - maximum sensitivity

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

11 0 11 No No No

Value

 

Description

0   Disable
1   sensitivity range

Parameter Number

Parameter Size

Parameter Name

Description

40 1 Threshold Check Enable/Disable Enable/Disable threshold reporting, check time can be adjusted by Param45. 0 - disable all threshold reports 1 - enable all threshold reports

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 No No No

Bit (Value)

 

Description

0 (1)   disable all threshold reports
1 (2)   enable all threshold reports

Parameter Number

Parameter Size

Parameter Name

Description

41 1 Temperature Threshold Threshold = (Value * 0.1) Scale is determined by Param64. 0 = disable.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

10 0 255 No No No

Value

 

Description

0   Threshold = (Value * 0.1) Scale is determined by Param64. 0 = disable.

Parameter Number

Parameter Size

Parameter Name

Description

42 1 Humidity Threshold Humidity range = 1% to 50%, 0 = disable.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

5 0 50 No No No

Value

 

Description

0   Humidity range = 1% to 50%, 0 = disable.

Parameter Number

Parameter Size

Parameter Name

Description

43 2 Lux Threshold 0 = disable

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

250 0 10000 No No No

Value

 

Description

0   Lux Threshold

Parameter Number

Parameter Size

Parameter Name

Description

44 1 UV Threshold 0 = disable

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 0 11 No No No

Value

 

Description

0   UV Threshold

Parameter Number

Parameter Size

Parameter Name

Description

45 2 Threshold Check Time Set threshold check time in seconds if threshold is enable via Param40. 1~65535 - When USB powered 60~65535 - When Battery powered

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

240 1 65535 No No No

Value

 

Description

1   Set threshold check time in seconds

Parameter Number

Parameter Size

Parameter Name

Description

46 1 Low Temperature Report Eable/Disable alarm report for low temperature(

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 0 1 No No No

Bit (Value)

 

Description

0 (1)   Disable
1 (2)   Enable

Parameter Number

Parameter Size

Parameter Name

Description

48 1 Sensor Limit Control This value is bit mask. Used to enable/disable measurement reports for various sensors that is more than the upper limit value or less than the lower limit value. 1 - Temperature upper level 2 - Humidity upper level 4 - Lux upper level 8 - UV upper level 16 - Temperature lower level 32 - Humidity lower level 64 - Lux lower level 128 - UV lower level

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 255 No No No

Parameter Number

Parameter Size

Parameter Name

Description

49 2 Temperature Upper Limit Set upper limit level for temperature set in scale of 0.1. Scale is determined by Param64. If (Current measurement) > (Upper Limit), then report sensor.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

280 -400 1000 No No No

From

 

To

Description

-400   1000 Set upper limit level for temperature

Parameter Number

Parameter Size

Parameter Name

Description

5 1 Motion Report Type Set which command class will be sent when motion sensor is triggered or detriggered. 0 - Sends Notification Report 1 - Sends Sensor Binary Report 2 - Sends Notification and Sensor Binary Report

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

2 0 2 No No No

Bit (Value)

 

Description

0 (1)   Sends Notification Report
1 (2)   Sends Sensor Binary Report
2 (4)   Sends Notification and Sensor Binary Report

Parameter Number

Parameter Size

Parameter Name

Description

50 2 Temperature Lower Limit Set lower limit level for temperature set in scale of 0.1. Scale is determined by Param64. If (Current Measurement) < (Lower limit), then report sensor.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 -400 1000 No No No

From

 

To

Description

-400   1000 Set lower limit level for temperature

Parameter Number

Parameter Size

Parameter Name

Description

51 1 Temperature Recover Limit Temperature recover limit set in scale of 0.1. Scale is determined by Param64. If (Current measurement) = (lower limit + recover limit), then temperature report.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

20 1 255 No No No

Value

 

Description

1   Temperature recover limit set in scale of 0.1.

Parameter Number

Parameter Size

Parameter Name

Description

52 1 Humidity Upper Limit Set humidity upper limit level.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

60 0 100 No No No

Value

 

Description

0   Set humidity upper limit level.

Parameter Number

Parameter Size

Parameter Name

Description

53 1 Humidity Lower Limit Set humidity lower limit level

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

40 0 100 No No No

Value

 

Description

0   Set humidity lower limit level

Parameter Number

Parameter Size

Parameter Name

Description

54 1 Humidity Recover Limit Set humidity recover limit level. Refer to Param 51.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

5 1 50 No No No

Value

 

Description

1   Set humidity recover limit level

Parameter Number

Parameter Size

Parameter Name

Description

55 2 Lux Upper Limit Set lux upper limit level.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1000 0 30000 No No No

Value

 

Description

0   Set lux upper limit level.

Parameter Number

Parameter Size

Parameter Name

Description

56 2 Lux Lower Limit Set lux lower limit level.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

100 0 30000 No No No

Value

 

Description

0   Set lux lower limit level.

Parameter Number

Parameter Size

Parameter Name

Description

58 1 UV Upper Limit Set UV upper limit level.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

8 1 11 No No No

Value

 

Description

1   Set UV upper limit level.

Parameter Number

Parameter Size

Parameter Name

Description

59 1 UV Lower Limit Set UV lower limit level.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

4 1 11 No No No

Value

 

Description

1   Set UV lower limit level.

Parameter Number

Parameter Size

Parameter Name

Description

6 1 Vibration Sensor Enable/Disable Used to enable/disable vibration sensor. 0 - disable vibration 1~254 - timeout set in minutes to reset vibration status 255 - timeout set in minutes to reset vibration status

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

255 0 255 No No No

Value

 

Description

0   disable vibration
1   timeout set in minutes to reset vibration status
255   timeout set in minutes to reset vibration status

Parameter Number

Parameter Size

Parameter Name

Description

60 1 UV Recover Limit Set UV recover limit level. Refer to Param 51.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 1 5 No No No

Value

 

Description

1   Set UV recover limit level.

Parameter Number

Parameter Size

Parameter Name

Description

61 1 Out-of-limit State This is read only and bit mask. Out of the limit state of sensors. Bit Mask: 0 - within limit 1 - out of limit Value: 1 - Temperature upper level 2 - Humidity upper level 4 - Lux upper level 8 - UV upper level 16 - Temperature lower level 32 - Humidity lower level 64 - Lux lower level 128 - UV lower level

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 255 Yes No No

Parameter Number

Parameter Size

Parameter Name

Description

64 1 Temperature Scale Set the scale for temperature when reports. 0 - Celsius 1 - Fahrenheit

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 No No No

Bit (Value)

 

Description

0 (1)   Celsius
1 (2)   Fahrenheit

Parameter Number

Parameter Size

Parameter Name

Description

67 1 Lux Recover Limit Set lux recover limit level. Refer to Param 51.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

100 1 255 No No No

Value

 

Description

1   Set lux recover limit level.

Parameter Number

Parameter Size

Parameter Name

Description

7 1 Vibration Intensity Reports Used to enable/disable vibration intensity reports. If set to 1, vibration intensity will be sent to gateway when triggered. If set to 0, do not report.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 No No No

Bit (Value)

 

Description

0 (1)   Disable
1 (2)   Enable

Parameter Number

Parameter Size

Parameter Name

Description

81 1 LED Activity Allow user to enable/disable LED activity of specific reports sent by sensor. Button press indicator is not affected by this. 0 - disable 1 - enable

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 0 1 No No No

Bit (Value)

 

Description

0 (1)   disable
1 (2)   enable

Parameter Number

Parameter Size

Parameter Name

Description

82 1 Motion Sensor Report Indicator If LED is enabled by Param81, allow user to change the report color of motion sensor. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

3 0 9 No No No

Bit (Value)

 

Description

0 (1)   Disable
1 (2)   Red
2 (4)   Blue
3 (8)   Green
4 (16)   Pink
5 (32)   Cyan
6 (64)   Purple
7 (128)   Orange
8 (256)   Yellow
9 (512)   White

Parameter Number

Parameter Size

Parameter Name

Description

83 1 Temperature Sensor Report Indicator If LED is enabled by Param81, allow user to change the report color of temperature sensor. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 9 No No No

Bit (Value)

 

Description

0 (1)   Disable. Other value descriptions, please see above description box of this parameter.

Parameter Number

Parameter Size

Parameter Name

Description

84 1 Humidity Sensor Report Indicator If LED is enabled by Param81, allow user to change the report color of humidity sensor. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 9 No No No

Bit (Value)

 

Description

0 (1)   Disable. Other value descriptions, please see above description box of this parameter.

Parameter Number

Parameter Size

Parameter Name

Description

85 1 Lux Sensor Report Indicator If LED is enabled by Param81, allow user to change the report color of Lux sensor. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 9 No No No

Bit (Value)

 

Description

0 (1)   Disable. Other value descriptions, please see above description box of this parameter.

Parameter Number

Parameter Size

Parameter Name

Description

86 1 UV Sensor Report Indicator If LED is enabled by Param81, allow user to change the report color of UV sensor. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 9 No No No

Bit (Value)

 

Description

0 (1)   Disable. Other value descriptions, please see above description box of this parameter.

Parameter Number

Parameter Size

Parameter Name

Description

87 1 Vibration Sensor Report Indicator If LED is enabled by Param81, allow user to change the report color of vibration sensor. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

2 0 9 No No No

Bit (Value)

 

Description

0 (1)   Disable. Other value descriptions, please see above description box of this parameter.

Parameter Number

Parameter Size

Parameter Name

Description

88 1 Battery Report Indicator If LED is enabled by Param81, allow user to change the report color of battery. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 9 No No No

Bit (Value)

 

Description

0 (1)   Disable. Other value descriptions, please see above description box of this parameter.

Parameter Number

Parameter Size

Parameter Name

Description

89 1 Wakeup Report Indicator If LED is enabled by Param81, allow user to change the report color of wakeup. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

8 0 9 No No No

Bit (Value)

 

Description

0 (1)   Disable. Other value descriptions, please see above description box of this parameter.

Parameter Number

Parameter Size

Parameter Name

Description

9 1 Wakeup CC Timeout Timeout set in seconds after Wakeup CC is send out before go to sleep. If wakeup no more information received, return to sleep mode immediately.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

15 0 255 No No No

Value

 

Description

0   Timeout set in seconds

Parameter Number

Parameter Size

Parameter Name

Description

90 1 Communication Indicator If LED is enabled by Param81, allow user to change indicator color when receiving communication from gateway or other devices. 0 - Disabled 1 - Red 2 - Blue 3 - Green 4 - Pink 5 - Cyan 6 - Purple 7 - Orange 8 - Yellow 9 - White

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 9 No No No

Bit (Value)

 

Description

0 (1)   Disable. Other value descriptions, please see above description box of this parameter.