Z-Wave Products

There are over 4053 interoperable Z-Wave products throughout the world, and over 94 million Z-Wave products have been sold since our beginnings in 2001. All of them work together regardless of brand, because they're all based on the common Z - Wavestandard.Browse our Product Finder to see what Z -Wave can do for you.

Z-Wave Configuration Capabilities

Model: Strips Comfort 700 (11 02 022)

Z-Wave Certification Number: ZC12-21030194


Parameter Number

Parameter Size

Parameter Name

Description

10 4 High ambient light (LUX) level trigger The sensor will send a light report when the light rises above this level. Can be used in scenarios to trigger other devices. When enabling parameter 10, parameter 11 must also be set with a lower value, else the trigger stays off

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 64000 No No No

From

 

To

Description

20   64000 LUX
0   0 Off

Parameter Number

Parameter Size

Parameter Name

Description

11 4 Low ambient light (LUX) level trigger The sensor will send a light report when the light goes below this level. Can be used in scenarios to trigger other devices. When enabling parameter 11, parameter 10 must also be set with a greater value, else the trigger stays off

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 42000 No No No

From

 

To

Description

10   42000 LUX
0   0 Off

Parameter Number

Parameter Size

Parameter Name

Description

2 1 LED alarm event reporting Turn On or Off LED for specific event indications (ex. alarms)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 0 2 No No No

Bit (Value)

 

Description

0 (1)   Off
1 (2)   On, but no LED indication for associated nodes (1/5 blinks)
2 (4)   On with LED indications based on success/fail for BOTH the gateway and the associated nodes

Parameter Number

Parameter Size

Parameter Name

Description

25 2 Temperature and Humidity reporting time (Activat Select the number of minutes between reports (15 mins to 24 hrs)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

30 15 1440 No No No

Value

 

Description

15   Minutes between reports (periodic reporting)

Parameter Number

Parameter Size

Parameter Name

Description

26 1 Temperature change for next report (Activated i Temperature must change by this value for new a report

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 5 100 No No No

Value

 

Description

5   Input value converted to one decimal place [= 0.5 to 10.0 (degree C/F) ]

Parameter Number

Parameter Size

Parameter Name

Description

28 1 Humidity change for next report (Activated in p Humidity must change by this value for a new report

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

5 2 10 No No No

Value

 

Description

2   %

Parameter Number

Parameter Size

Parameter Name

Description

29 1 Slider switch function Select if the switch should act as a binary switch or a timed switch.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 1 2 No No Yes

Bit (Value)

 

Description

1 (2)   Binary Switch
2 (4)   Timed Switch

Parameter Number

Parameter Size

Parameter Name

Description

30 1 Timed Switch duration Select the duration that should trigger the opposite state of the Switch (if 2 is selected in parameter 29)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

5 1 60 No No Yes

Value

 

Description

1   minutes

Parameter Number

Parameter Size

Parameter Name

Description

31 1 Use Multi-Command encapsulation Send Temperature and Humidity sensor value reports and or Temperature Alarms related reports (Notification Report + Multi-Level Sensor Report + Central Scene Notification) in one message, this saves battery power. Make sure your gateway supports Multi-Command Command Class first.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 No No Yes

Bit (Value)

 

Description

0 (1)   Off
1 (2)   On

Parameter Number

Parameter Size

Parameter Name

Description

32 1 Use Central Scene Notifications Central Scene Notifications are sent for the Slider Switch state change, High and Low Temperature Alarms and High and Low Ambient Light states. Scenes could be configured in the gateway. Scenes allow multiple devices to be controlled by a single Z-Wave command.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 0 1 No No Yes

Bit (Value)

 

Description

0 (1)   Off
1 (2)   On

Parameter Number

Parameter Size

Parameter Name

Description

33 1 Basic Set value sent to Association group 3 when This parameter defines the value sent to the devices in the Association group 3 (using Basic Command Class).

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

255 0 255 No No Yes

Value

 

Description

0   Basic Set value sent to Association group 3 when the slider switch is on

Parameter Number

Parameter Size

Parameter Name

Description

34 1 Basic Set value sent to Association group 3 when This parameter defines the value sent to the devices in the Association group 3 (using Basic Command Class).

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 255 No No Yes

Value

 

Description

0   Basic Set value sent to Association group 3 when the slider switch is off

Parameter Number

Parameter Size

Parameter Name

Description

35 1 Thermostat mode for Association group 4 on Binar This config parameter defines the value sent to the devices in the Association group 4 (using Thermostat Mode Command Class). Refer the Thermostat modes supported by the associated node

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 1 13 No No Yes

Value

 

Description

1   Thermostat mode for Association group 4 when the slider switch is on

Parameter Number

Parameter Size

Parameter Name

Description

36 1 Basic Set value sent to Association group 6 on H This config parameter defines the value sent to the devices in the Association group 6 (using Basic Command Class)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 255 No No Yes

Value

 

Description

0   Basic Set value sent to Association group 6 on High Temperature Alarm

Parameter Number

Parameter Size

Parameter Name

Description

37 1 Basic Set value sent to Association group 6 on L This config parameter defines the value sent to the devices in the Association group 6 (using Basic Command Class)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

255 0 255 No No Yes

Value

 

Description

0   Basic Set value sent to Association group 6 on Low Temperature Alarm

Parameter Number

Parameter Size

Parameter Name

Description

38 1 Basic Set value sent to the Association group 7 This config parameter defines the value sent to the devices in the Association group 7 (using Basic Command Class)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

255 0 255 No No Yes

Value

 

Description

0   Basic Set value sent to the Association group 7 on High ambient light level report

Parameter Number

Parameter Size

Parameter Name

Description

39 1 Basic Set value sent to the Association group 7 This config parameter defines the value sent to the devices in the Association group 7 (using Basic Command Class)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 255 No No Yes

Value

 

Description

0   Basic Set value sent to the Association group 7 on Low ambient light level report

Parameter Number

Parameter Size

Parameter Name

Description

4 1 Temperature & Humidity reporting Select temperature and humidity sensor reporting

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

2 0 3 No No No

Bit (Value)

 

Description

0 (1)   Off
1 (2)   On. Sends temperature/humidity based on difference from last reported value (set in config parameters 26 and 28)
2 (4)   On. Timed reporting of the actual temperature and the actual humidity value (set time in config parameter 25)
3 (8)   On. Timed reporting of the average temperature value between reports. Will also send the actual humidity value (set time in config parameter 25)

Parameter Number

Parameter Size

Parameter Name

Description

5 1 Temperature unit Select the temperature scale Default: 0 (Except US frequency) or 1 (US frequency)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 0 1 No No No

Bit (Value)

 

Description

0 (1)   Celcius
1 (2)   Fahrenheit

Parameter Number

Parameter Size

Parameter Name

Description

6 1 Temperature alarms Turn On or Off temperature alarm (Independent of config parameter 4 setting)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 No No No

Bit (Value)

 

Description

0 (1)   Off
1 (2)   On

Parameter Number

Parameter Size

Parameter Name

Description

7 2 High temperature alarm level Select high temperature alarm level "-20 to +80 (degree C) or -4 to +176 (degree F) (US frequency)" Default: "40 C or 104 F (US frequency)"

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

104 -4 176 No No No

From

 

To

Description

-4   176 (degree F) (US frequency)

Parameter Number

Parameter Size

Parameter Name

Description

8 2 Low temperature alarm level Select low temperature alarm level "-20 to +60 (degree C) or -4 to +140 (degree F) (US frequency)" Default: "5 C or 41 F (US frequency)"

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

41 -4 140 No No No

From

 

To

Description

-4   140 (degree F) (US frequency)

Parameter Number

Parameter Size

Parameter Name

Description

9 1 Ambient light reporting Turn on and off ambient light reporting. Settings 2-8 turn on ambient light reporting and adds a filter meant to decrease responsiveness of reporting, in order to avoid short fluctuations of light, such as car headlights. (Does not affect reporting as set in config parameter 10 & 11)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

8 0 8 No No No

Value

 

Description

0   Off
1   Reporting visual changes without filter (This configuration will affect the sensor battery life if placed where light fluctuates significantly)
2   Filter length. 2 is the fastest filter allowing quick responses. 8 is a slower filter setting and will give the longest battery life