There are over 4228 interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 1 | 1 | On/Off Paddle Orientation | Choose if you want the upper paddle to turn the light on or turn the light off when tapped. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 2 | No | No | No |
Value |
Description |
||||
| 0 | Upper paddle turns the light on, lower paddle turns it off (default) | ||||
| 1 | Upper paddle turns the light off, lower paddle turns it on | ||||
| 2 | Any paddle turns light on/off. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 10 | 1 | Minimum Brightness | Set the minimum brightness level (in %) for your dimmer. You won’t be able to dim the light below the set value. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 0 | 99 | No | No | No |
Value |
Description |
||||
| 1 | percent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 11 | 1 | Maximum Brightness | Set the maximum brightness level (in %) for your dimmer. You won’t be able to add brightness to the light beyond the set value. Note: if Parameter 12 is set to value 0, Parameter 11 is automatically disabled. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 99 | 1 | 99 | No | No | No |
Value |
Description |
||||
| 1 | percent | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 12 | 1 | Double Tap Behavior | Choose what you'd like the dimmer to do when you double-tap the upper paddle. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 3 | No | No | No |
Value |
Description |
||||
| 0 | the light will turn on to full brightness (default) | ||||
| 1 | the light will turn on to the custom brightness level set in parameter 18 | ||||
| 2 | the light will turn on to the maximum brightness level set in Parameter 11 | ||||
| 3 | double tap disabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 15 | 1 | Smart Bulb Mode: Enable/Disable Paddle / Z-Wave Control | Enable or disable paddle on/off control (aka disable the relay). If disabled, you’ll only be able to control the connected light via Z-Wave. Scenes and other functionality will still be available through paddles. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 0 | 2 | No | No | No |
Value |
Description |
||||
| 0 | physical paddle control disabled | ||||
| 1 | physical paddle control enabled (default) | ||||
| 2 | physical paddle and Z-Wave control disabled | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 16 | 1 | Physical Dimming Speed | Set the time it takes to get from 0% to 100% brightness when pressing and holding the paddle (physical dimming). The number entered as value corresponds to the number of seconds. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 5 | 1 | 99 | No | No | No |
Value |
Description |
||||
| 1 | seconds | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 18 | 1 | Custom Brightness Level On | Set the custom brightness level (instead of the last set brightness level) you want the dimmer to come on to when you single tap or double tap the upper paddle (see parameters 12 and 25). | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 99 | No | No | No |
Value |
Description |
||||
| 0 | last brightness level (default) | ||||
| 1 | % for custom brightness level | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 19 | 1 | 3-Way Switch Type | Choose the type of 3-way switch you want to use with this dimmer in a 3-way set-up. Changing this setting can allow you to control brightness and dim the light from both 3-way locations. Use a regular momentary switch (like the Zooz ZAC99 accessory switch) if value is set to 2. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 3 | No | No | No |
Value |
Description |
||||
| 0 | regular mechanical 3-way on/off switch, use the connected 3-way switch to turn the light off or on to the last brightness level, dimming only available from the Zooz Z-Wave dimmer and from the hub (or through voice control if smart speaker is integrated with your Z-Wave hub) | ||||
| 1 | regular mechanical 3-way on/off switch, tap the paddles once to change state (light on or off), tap the paddles twice quickly to turn light on to full brightness, tap the paddles quickly 3 times to enable a dimming sequence (the light will start dimming up and down in a loop) and tap the switch again to set the selected brightness level | ||||
| 2 | momentary switch, click once to change status (light on or off), click twice quickly to turn light on to full brightness, press and hold to adjust brightness (dim up / dim down in sequence) | ||||
| 3 | momentary switch, click once to change status (light on or off), click twice quickly to turn light on to full brightness, press and hold to adjust brightness (dim up / dim down in sequence but always reduce brightness after double click) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 2 | 1 | LED Indicator Control | Choose if you want the LED indicator to turn on when the switch (light) is on or off, or if you want it to remain on or off at all times. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 3 | No | No | No |
Value |
Description |
||||
| 0 | LED indicator is on when switch is off, LED indicator is off when switch is on (default) | ||||
| 1 | LED indicator is on when switch is on, LED indicator is off when switch is off; | ||||
| 2 | LED indicator is always OFF | ||||
| 3 | LED indicator is always ON | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 20 | 1 | Paddle Behavior for Smart Bulb Mode | Choose how you'd like the dimmer to report when paddles are tapped and held and physical / Z-Wave control is enabled or disabled. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 2 | 0 | 2 | No | No | No |
Value |
Description |
||||
| 0 | report each brightness level to hub when physical / Z-Wave control is disabled for physical dimming (final level only reported if physical / Z-Wave control is enabled) | ||||
| 1 | report final brightness level only for physical dimming, regardless of the physical / Z-Wave control mode | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 21 | 1 | Reporting Behavior for Smart Bulb Mode | Set reporting behavior for disabled physical control. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 1 | No | No | No |
Value |
Description |
||||
| 0 | switch reports on/off status and changes LED indicator state even if physical and Z-Wave control is disabled (default) | ||||
| 1 | switch doesn't report on/off status or change LED indicator state when physical (and Z-Wave) control is disabled. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 22 | 1 | Night Light Mode | Set the brightness level the dimmer will turn on to when off and when lower paddle is held DOWN for a second. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 20 | 0 | 99 | No | No | No |
Value |
Description |
||||
| 0 | disabled | ||||
| 1 | % brightness | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 23 | 1 | LED Indicator Color | Choose the color of the LED indicator. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 0 | 3 | No | No | No |
Value |
Description |
||||
| 0 | white | ||||
| 1 | blue | ||||
| 2 | green | ||||
| 3 | red | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 24 | 1 | LED Indicator Brightness | Choose the LED indicator's brightness level. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 0 | 2 | No | No | No |
Value |
Description |
||||
| 0 | bright (100%) | ||||
| 1 | medium (60%) | ||||
| 2 | low (30%) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 25 | 1 | Single Tap Behavior | Choose what you'd like the dimmer to do when you tap the upper paddle once. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 3 | No | No | No |
Value |
Description |
||||
| 0 | the light will turn on to the last brightness level (default) | ||||
| 1 | the light will turn on to the custom brightness level set in parameter 18 | ||||
| 2 | the light will turn on to the maximum brightness level set in Parameter 11 | ||||
| 3 | the light will turn on to full brightness | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 3 | 4 | Auto Turn-Off Timer | Use this parameter to enable or disable the auto turn-off timer function (the time after which you want the switch to automatically turn off once it has been turned on). | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 65535 | No | No | No |
Value |
Description |
||||
| 0 | timer disabled (default) | ||||
| 1 | minutes | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 5 | 4 | Auto Turn-On Timer | Use this parameter to enable or disable the auto turn-on timer function (the time after which you want the switch to automatically turn on once it has been turned off). | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 65535 | No | No | No |
Value |
Description |
||||
| 0 | timer disabled | ||||
| 1 | minutes | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 8 | 1 | On Off Status After Power Failure | Set the on off status for the switch after power failure. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 2 | 0 | 2 | No | No | No |
Value |
Description |
||||
| 0 | forced to OFF (regardless of state prior to power outage) | ||||
| 1 | forced to ON (regardless of state prior to power outage) | ||||
| 2 | remembers and restores on/off status after power failure (default) | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 9 | 1 | Ramp Rate Control | Adjust the ramp rate for your dimmer (fade-in / fade-out effect for on / off operation). Values correspond to the number of seconds it take for the dimmer to reach full brightness or turn off when operated manually. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 1 | 1 | 99 | No | No | No |
Value |
Description |
||||
| 1 | seconds | ||||