Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Model: Ezlo Secure (EzloSecure-US)

Z-Wave Certification Number: ZC12-21090306

Procedure	Instructions
Where to find S2 DSK on product	The full DSK can be found on the Ezlo Secure product packaging. The first 5 DSK digits (PIN) is placed on the bottom of the Ezlo Secure product
Controller Classic Inclusion	The Classic Inclusion process can be started via UI. From your Dashboard, go to Devices > tap on the + in the top right corner and select or search the name or type of device that you wish to pair with Ezlo Secure. To add a generic Z-Wave device, select the Generic Z-Wave device from the device categories. To add the device with your Ezlo Secure, if the device requires assembly read the manual, follow the assembly instructions there, power the device, and click Next. Once the blue message at the top of the page says Add new device now, follow the process as described in the user manual. To finish, choose a name for the new device, add the device to favorites (optional), edit the name, assign it to a room, and click I’m done adding devices
Controller Classic Exclusion	The Exclusion process can be started via UI. From the list of devices, tap on the selected device and go to that device's settings On the device settings page press delete device Select unpair if your device is still connected to your network, and delete if the device is no longer connected. Unpair will redirect you through the excluding wizard of the device. You need to have physical access to the device as well
Controller Learn Mode	Go to the Settings from the side menu. From the Settings, tap on Learning Mode. To add this hub as a secondary controller, tap on Enable Learning mode Once you press Enable Learning mode, you will see the Learning mode process is started. It may take a few minutes
Controller Replication	Once the inclusion is successfully finished you can start the Controller Replication process. Tap on the Start discovery button. The discovery process has been started and you can see how many devices are discovered in the Z-Wave network. Discovered devices will appear on the list of discovered devices. You can rename the discovered devices and assign them to a room. If you don’t want to rename or assign to a room, just tap the Finish button.
Controller Provisioning List	Navigate to Start Devices screen with a list of devices Tap on the Info button and see the device details in an additional screen. On this screen you can change the device name, the encryption connection, and the inclusion type. To change the encryption connection, tap on the > button.
Factory Reset Procedure	Find the "Reset" button on the controller near the Ethernet cable connector. Push and hold the RESET button for at least 5 sec (on Ezlo Secure LED starts blinking RED), After that your Ezlo controller will be reset to factory defaults. Reset to Factory Settings remove all the information about added devices and reset ZWave chip (new Home ID, new S0/S2 keys, remove all Z-Wave nodes), scenes created, House modes settings, etc. The process is irreversible.
Capability Rediscovery	Go to the Devices screen and tap on the > button to see the device options and tap on the Z-Wave settings option On General settings, select Rediscover device and tap on it. On the rediscovery device screen tap on the Rediscover button. The rediscovery process will start
Controller SmartStart Inclusion	With Smart Start, you can add Z-Wave devices automatically by scanning their QR codes. From your Dashboard, go to Devices > tap on the + in the top right corner. Select the Z-Wave Smart Start entry. Tap on the Arrow next to the text. On the box of your device, you should find a QR code, usually labeled with a Smart Start title. When you select "Z-Wave Smart Start" in the iOS app, the camera of your phone will be turned on to scan the QR-code. Once a QR code has been scanned the adding process starts. The device is added to the system and you will see a Set Up Device screen. To continue, choose a name for the new device, edit the name, assign it to a room, and click Continue The device is added to the system and you will see a Set Up Device screen. To continue, choose a name for the new device, edit the name, assign it to a room, and click Continue Select the inclusion type - Smart Start. Tap on the Continue button. In the next step, you will see the confirmation screen that your device is ready. Just turn on your device and it will be added automatically. You can check the Smart Start device state in Settings Turn on your device. You will get a push notification New device is available. Tap on the notification and the VeraMobile app is opened to the list of Smart Start devices.