Z-Wave Products

There are over 4105 interoperable Z-Wave products throughout the world, and over 94 million Z-Wave products have been sold since our beginnings in 2001. All of them work together regardless of brand, because they're all based on the common Z - Wavestandard.Browse our Product Finder to see what Z -Wave can do for you.

Z-Wave Configuration Capabilities

Model: Ness Z-Wave LUX PIR Sensor (ZA-117001)

Z-Wave Certification Number: ZC12-21060233


Parameter Number

Parameter Size

Parameter Name

Description

1 2 Motion Alarm Retrigger Duration The duration in seconds that the motion alarm would not be sent since last motion alarm reported. The motion alarm report is enabled only when the duration timer has expired. Range: 10~3600; Default: 240; value = 10 disable motion alarm report. Any valid value that great than 10 enable motion alarm report.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

240 10 3600 Yes No No

Value

 

Description

10   Disable motion alarm report
11   Enable motion alarm report

Parameter Number

Parameter Size

Parameter Name

Description

10 1 Night Light ON Duration Range: 0~1. Value = 0 Night Light ON for 10 seconds (default). Value = 1 Night Light ON for 30 seconds.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 Yes No Yes

Value

 

Description

0   Night Light ON for 10 seconds
1   Night Light ON for 30 seconds

Parameter Number

Parameter Size

Parameter Name

Description

11 1 Night Light ON based on ambient light level meas Range: 0~1. Value = 0 Night Light ON only when sense detects total darkness (default). Value = 1 Night Light ON only when a small amount of light is detected.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 Yes No Yes

Value

 

Description

0   Night Light ON only when sense detects total darkness (default)
1   Night Light ON only when a small amount of light is detected

Parameter Number

Parameter Size

Parameter Name

Description

12 1 Enable Tamper Alarm Report This parameter setting is used to enable/disable the device cover removed Tamper Alarm report. Range: 0~1. Value = 0 - disable the Tamper Alarm report. Value = 1 - enable the Tamper Alarm report. (default)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

1 0 1 Yes No Yes

Value

 

Description

0   Disable the Tamper Alarm report
1   Enable the Tamper Alarm report

Parameter Number

Parameter Size

Parameter Name

Description

13 1 Walk Test Mode Duration This parameter setting is used to set the time out for Walk Test Mode. Range: 0~3. Value = 0 - disable Walk Test Mode; Value = 1 - 10 minutes; Value = 2 = 30 minutes (default); Value = 3 - 60 minutes.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

2 0 3 Yes No Yes

Value

 

Description

0   Disable Walk Test Mode
1   Walk Test Mode 10 minutes
2   Walk Test Mode 30 minutes (default)
3   Walk Test Mode 60 minutes

Parameter Number

Parameter Size

Parameter Name

Description

2 1 Motion Alarm Retrigger Modes This option will select how the motion alarm retrigger duration timer (CPN#1) to be reset. Range: 0~1. Value = 0, in this mode, the motion alarm retrigger duration timer (CPN#1) will be reset to zero once the motion event is detected. Hence, the motion alarm retrigger duration timer will start recounting which extends the retrigger duration. This mode will extend the battery life and reduce unnecessary motion alarm reports (default). Value = 1, in this mode, the motion alarm retrigger duration timer (CPN#1) would not be reset once the motion event has detected. The motion alarm reports will be enabled to send once the motion alarm retrigger duration timer has expired. In this mode, it will report the motion alarm event with greater fidelity. This setting might be used where the device will be used for automation tasks.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 Yes No Yes

Value

 

Description

0   Motion alarm retrigger duration timer (CPN#1) will be reset to zero once the motion event is detected
1   Motion alarm retrigger duration timer (CPN#1) would not be reset once the motion event has detected

Parameter Number

Parameter Size

Parameter Name

Description

3 2 Motion Clear Duration The period of time in seconds to send motion clear report after motion alarm has reported in Security Mode. Range: 0~3600; Default: 10; value = 0 disable motion clear report.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

10 0 3600 Yes No No

Value

 

Description

0   Disable motion clear report
1   Enable motion clear report

Parameter Number

Parameter Size

Parameter Name

Description

4 1 Low battery setting Report battery low warning message when battery level reaches this value (percentage). Range: 10~50 (10%~50%)

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

10 10 50 Yes No No

Value

 

Description

10   Low warning message when battery level reaches this value

Parameter Number

Parameter Size

Parameter Name

Description

5 1 Battery Scheduled Report Interval The battery level scheduled report interval time is based on every 30 minutes per kick. The value N related to the time in minutes is N x 30 minutes. Range: 0~120. Default: 12 (12x30 =360 minutes). Value = 0 Disable Battery level scheduled report Battery level scheduled report.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

12 0 120 Yes No Yes

Value

 

Description

0   Disable Battery level scheduled report
1   N x 30 minute battery level scheduled report

Parameter Number

Parameter Size

Parameter Name

Description

6 1 Luminance Change threshold This parameter determines the change in Lux of light intensity level resulting in sending luminance report. Range: 0~60 (Lux). Default: 50. Value = 0 Disable luminance value scanning, no report. Note: The luminance value is scanned every 5 seconds. A luminance report will be sent if a change over the set threshold value is detected.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

50 0 60 Yes No Yes

Value

 

Description

0   Disable luminance value scanning, no report
1   Lux luminance value

Parameter Number

Parameter Size

Parameter Name

Description

7 1 Temperature Change threshold This parameter determines the change in temperature value resulting in sending temperature value report. Range: 0~80 (10 = 1.0 °C or °F; 20 = 2.0 °C). Value > 0 and <10 set as 10. Default: 10. Value = 0 Disable temperature value scanning, no report. Note: The temperature value is scanned every 5 minutes. A temperature report will be sent if a change over the set threshold valueis detected.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

10 0 80 No No Yes

Value

 

Description

0   No report sent
11   Temperature range from 1-80°C

Parameter Number

Parameter Size

Parameter Name

Description

8 1 Temperature Scheduled report interval The temperature value report interval time is based on 30 minutes per kick. The value N related to the time in minutes is N x 30 minutes. Range: 0~120. Default: 6 (6x30 =180 minutes). Value = 0 Disable temperature scheduled report.

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

6 0 120 Yes No Yes

Value

 

Description

0   Disable temperature scheduled report
1   N x 30 minutes temperature scheduled report

Parameter Number

Parameter Size

Parameter Name

Description

9 1 Temperature Scale Setting Option to select the temperature scale type reported in Celsius or Fahrenheit. Range: 0~1. Value = 0 Celsius (C): Value = 1 Fahrenheit (F).

Default Value

Minimum Value

Maximum Value

Read Only

Re-Inclusion

Advanced

0 0 1 Yes No No

Value

 

Description

0   Celsius
1   Fahrenheit