Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Procedure	Instructions
Dynamic Capabilities	pls chekc the user manual on page 9
Notice of Capability Rediscovery Needed	NA
Where to find S2 DSK on product	on the side of product
Classic Inclusion	1. Power on your Door Sensor, set your Z-Wave controller into add/inclusion mode. 2. Trigger this action 3. LED will flash green during the inclusion, and then solid green for 2 seconds to indicate the inclusion is successful, otherwise the LED will solid red for 2 seconds in which you need to repeat the process form step 2
Classic Exclusion	1. Power on your Door Sensor, and let the Z-Wave primary controller into remove/exclusion mode. 2. Trigger this action. 3. LED will flash red during the exclusion, and then solid red for 2 seconds to indicate that the exclusion is successful, otherwise the LED will solid green for 2 seconds in which you need to repeat the process form step 2.
Wake-Up Procedure	On the network: Send Wake up notification, and LED will fast blink green during sending data.
Factory Reset Procedure	Reset Door Sensor to factory default. LED will blink red faster and faster within 5 seconds and then keep solid red until the button is released. Device will reset itself to factory default by sending a “Device Reset Locally Notification” to gateway when the button is released.