TThere are thousands of interoperable
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 1 | 1 | Temperature Scale | Use this parameter to switch from Fahrenheit to Celsius scale. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 0 | 0 | 1 | No | No | No |
Value |
Description |
||||
| 0 | Celsius | ||||
| 1 | Fahrenheit | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 2 | 1 | Temperature Reporting Threshold | Use it to set temperature change to be reported by the sensor (where 1 stands for 0.1 degree and 50 stands for 5 degrees). | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 30 | 1 | 50 | No | No | No |
Value |
Description |
||||
| 1 | 0.1 - 5 degrees | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 3 | 1 | Humidity Reporting Threshold | Use it to set humidity percentage change to be reported by the sensor. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 20 | 1 | 50 | No | No | No |
Value |
Description |
||||
| 1 | % | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 4 | 1 | Light Reporting Threshold | Use it to choose light percentage change to be reported by the sensor. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 25 | 5 | 50 | No | No | No |
Value |
Description |
||||
| 5 | % | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 5 | 1 | Motion Re-trigger Duration | Use it to set trigger interval - the time when motion is reported again after initial trigger | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 15 | 15 | 255 | No | No | No |
Value |
Description |
||||
| 15 | seconds | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 6 | 1 | Motion Sensitivity Level | Use it to adjust PIR sensor sensitivity, where 1 = very high sensitivity and 7 = very low sensitivity. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 4 | 1 | 7 | No | No | No |
Value |
Description |
||||
| 1 | 1 = very high sensitivity and 7 = very low sensitivity | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 7 | 1 | LED Indicator Mode | Use it to choose between LED indicator modes. | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 3 | 1 | 3 | No | No | No |
Value |
Description |
||||
| 1 | LED indicator is turned off (no visual notifications). | ||||
| 2 | temperature and motion indicated with flashing light. Flashes every 3 minutes for temperature. | ||||
| 3 | no indication for temperature, motion indicated with red flashing light. | ||||
Parameter Number |
Parameter Size |
Parameter Name |
Description |
||
| 8 | 1 | Retry Count | Set 0~10 Retry Count, default:3 | ||
Default Value |
Minimum Value |
Maximum Value |
Read Only |
Re-Inclusion |
Advanced |
| 3 | 0 | 10 | No | No | No |
Value |
Description |
||||
| 0 | retries | ||||