Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Procedure	Instructions
Classic Exclusion	1. Open the cover. 2. Place the Motion-Control within the direct range of your Z-Wave controller. 3. Set the main controller in remove mode (see the controller’s manual). 4. Quickly, three times press the B-button. 5. Wait for the removing process to end. 6. Successful removing will be confirmed by the Z-Wave controller’s message.
Wake-Up Procedure	1x click: wake up the device or select the desired menu option (if menu is active)
Factory Reset Procedure	Resetting the Motion-Control Reset procedure erases the memory, including all information on the Z-Wave network and the main controller. 1. Open the cover. 2. Press and hold the B-button. 3. Wait for visual indicator to glow yellow (2nd menu position). 4. Release the B-button. 5. Click the B-button to confirm selection. 6. After few seconds the device will be reset, which is signalled with the red, fading visual indicator colour.
Classic Inclusion	To add the device to the Z-Wave network manually: 1. Open the cover. 2. Place the Motion-Control within the direct range of your Z-Wave controller. 3. Set the main controller in (security/non-security) add mode (see the controller’s manual). 4. Quickly, three times press the B-button. 5. Wait for the adding process to end. 6. Successful adding will be confirmed by the Z-Wave controller’s message