Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Procedure	Instructions
Factory Reset Procedure	To return your switch to factory defaults: Pull the airgap switch. Press and hold the bottom button, push the airgap switch in and continue holding the bottom button for 10 seconds. The LED will flash once each of the 8 colors then stop.
Where to find S2 DSK on product	Page 1
Classic Inclusion	Adding your device to a Z-Wave network 1. Follow the instructions for your Z-Wave certified Controller to add a device to the Z-Wave network. 2. Once the controller is ready to add your device, press the top of bottom of the wireless smart Fan controller
Classic Exclusion	To remove and reset the device 1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-wave network 2. Once the controller is ready to remove your device, press the top or bottom of the wireless smart Fan controller