Product Network Management Instructions

Z-Wave Network Management & Other Instructions

Model: Mini Gateway (ZA1021BR-7)

Z-Wave Certification Number: ZC12-23100351

Procedure	Instructions
Capability Rediscovery	Step 1: Click “Request” button, the Mini Gateway would rediscovery the device capability. Step 2: If successful, the device information would update correctly.
Controller Classic Exclusion	Step 1: Click button “Remove Device”. Step 2: System is on exclusion mode and waiting for user to trigger the intended device to removal mode. Step 3: If the exclusion is successful, system will show the excluded node ID on the pop-up window.
Controller Learn Mode	1) Follow the manufacturer’s instructions of the other controller to enable it into Add mode. 2) Click “Learn Mode” button. If it is a S2 Controller, the DSK of the Gateway will appear. Please key in the DSK to the other Controller UI when prompted. 3) When completed, the UI will show the existing Controller and device(s) in the network.
Controller Replication	1) Start the add device process in Adding Device. 2) Follow the manufacturer’s instructions of the other controller to enable it to go into learn mode. 3) Enter DSK code if necessary, and await the whole process to finish.
Controller SmartStart Inclusion	Step 1: Click “SmartStart” from Z-Wave menu. Step 2: Type in 40 decimals S2 DSK number of the device which user wants to add in using SmartStart and presses “Send”.
Controller Provisioning List	You can use “Remove” button to remove the specified DSK.
Where to find S2 DSK on product	page 23
Controller Classic Inclusion	Step 1: Click button “Add Device” on the website. Step 2: System is on inclusion mode and waiting for user to trigger inclusion mode of device. Step 3: After triggering device, the gateway will show “Setting Security Grant”. If the device supports S2 Security, please choose the security level for the device. If the selection is “S2 Access Control” or “S2 Authenticated”, the system will prompt user to input the device first 5 digit of the DSK. If device only supports S0, the gateway will automatically skip “Setting Security Grant” step. Step 4: Wait for the whole inclusion process to finish; it may take up to 1-2 minutes depending on the device. Step 5: If the inclusion is successful, the system will show “device included successfully”. Otherwise, a failure message will appear. Step 6: If the inclusion is successful, you will be asked to name the device and set up a location of the device.
Factory Reset Procedure	Step 1: Click Gateway setting button. Step 2: Select “Z-Wave Reset” button. Step 3: Confirm the dialog. Click “Reset” button will perform a factory reset to the Gateway.