Product Recognition
Certification Number	ZC10-16015002
Name	10 Year Smoke Detector and Siren
Short Description	EN 14604 certified 10 Year Smoke Detector with built in Z-Wave controllable siren function
Long Description	This products consists of a standard high-quality photo electric Smoke detector with a pluggable Z-Wave wireless interface module. The Smoke detector will also work as a stand alone product and is certified by VDS as '10 year Smoke Detector' The smoke chamber of the detector has a stainless steel reel with antistatic plastic chamber. A button allows on-device test of smoke chamber, electronics and battery. The device also offers a built-in self test and an electronic smoke chamber test to avoid the use of test aerosol. A low battery warning will last for 30 days but full function of the detector is guaranteed during this time. The Z-Wave module allows to report the smoke and low battery alarm wirelessly to a central controller. The detector can also be used as a wireless siren for alarm system or other applications.
Brand	Z-Wave.Me
Product Identifier	009402
OEM Version	HW: 1 FW: 1.00
Hardware Platform	ZM5202
Z-Wave Version	6.51.06
Library Type	SLAVE_ENHANCED_232
Device Type	Notification Sensor
Role Type	ROLE_TYPE_SLAVE_SLEEPING_LISTENING
Manufacturer ID	0x0115
Product Type ID	0x0004
Product ID	0x0003
User Icon	0x0C01
Installer Icon	0x0C01
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	Sensors, Security Add-Ons
Countries / Regions	European Union
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_BASIC Basic 0x20 1
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual 009402_ManualOEMCERT.pdf
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 10 0 Z-Wave Plus Lifeline 3 10 0 Switching Command. All devices in this group will receive a BASIC SET command on Smoke Alarms. Configuration parameter 3 and 4 will define when ON and when OFF is sent. 2 10 0 Alarm Reports. All devices in this group will receive Alarm notifications (Smoke , Battery Low, Tamper)
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 4 Value of Off-Command This value is sent as BASIC Set to Association Group 3 when an Smoke Alarm is cleared. 0 1 0 0 0 From To 0 0 0 0 1 Siren alarm sequence interval The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the interval in seconds. 0 1 0 0 10 From To Description 6 129 seconds 0 0 2 Siren alarm tone length The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the sound versus silence within this interval. Please make sure this value is always smaller (shorter time) than parameter 1 that defines the whole sequence. 0 1 0 0 8 From To Description 1 99 seconds 0 0 3 Value of On-Command This value is sent as BASIC Set to Association Group 3 when an Smoke Alarm occurs. 0 1 0 0 99 From To 0 0 0 0
Texts	ID Description Value 1 Inclusion To include the device start the inclusion on your controller and then hit the little button on the wireless module for 1 second 2 Exclusion To exclude the device start the inclusion on your controller and then hit the little button on the wireless module for 1 second 5 Factory Reset To reset the device keep the button pushed for 10 seconds. After 5 seconds the led starts flashing and after another 5 seconds there is a short beep signaling the successful reset back to factory defaults. Use this procedure only when the network primary controller is missing or otherwise inoperable.
Supports NWI	Yes
Supports Explorer Frames	Yes
Is Flirs	Yes