Product Recognition
Certification Number	ZC10-16035024
Name	10 Year Z-Wave Smoke Alarm
Short Description	This product consists of a standard high-quality, 10 year sealed-battery photoelectric Smoke Alarm designed to European standards, combined with a plug-in Z-­Wave wireless communication module. The Smoke Alarm will also work as a stand-alone product and is certified by VDS as '10 year Smoke Alarm' and satisfies all EN14604 requirements. Patented, high-performance optical chamber with integral micro-mesh fixed insect screen further reduces the possibility of false alarms.
Long Description	This product consists of a standard high-quality, 10 year sealed-battery photoelectric Smoke Alarm designed to European standards, combined with a plug-in Z-­Wave wireless communication module. The Smoke Alarm will also work as a stand-alone product and is certified by VDS as '10 year Smoke Alarm' and satisfies all EN14604 requirements. Patented, high-performance optical chamber with integral micro-mesh fixed insect screen further reduces the possibility of false alarms. A large test button allows on-device testing of smoke chamber, electronics and battery. The device also offers a built-­in self-test and an electronic smoke chamber test making the use of test aerosol unnecessary. A low battery warning will last for 30 days, but full function of the Alarm will continue during this time. The Z-Wave module allows the device to report smoke and low battery alarms wirelessly to a central Z-Wave Controller.
Brand	Ei Electronics
Product Identifier	Ei600ZW
OEM Version	HW: 1 FW: 1.00
Hardware Platform	ZM5202
Z-Wave Version	6.51.06
Library Type	SLAVE_ENHANCED_232
Device Type	Notification Sensor
Role Type	ROLE_TYPE_SLAVE_SLEEPING_LISTENING
Manufacturer ID	0x026B
Product Type ID	0x0004
Product ID	0x0003
User Icon	0x0C01
Installer Icon	0x0C01
Frequency Plans	EU: 869.85MHz, 868.40MHz
Categories	Sensors, Security Add-Ons
Countries / Regions	European Union
Controlled Command Classes	Identifier Name Key Version COMMAND_CLASS_BASIC Basic 0x20 1
Documents	Category Description File Manual_Primary_Lang Product or Owner's Manual EI600ZW_ManualCERT.pdf
Association Groups	Group Number Maximum Nodes Supported End Point ID Description 1 10 0 Z-Wave Plus Lifeline 2 10 0 Alarm Reports. All devices in this group will receive Alarm notifications (Smoke , Battery Low, Tamper) 3 10 0 Switching Command. All devices in this group will receive a BASIC SET command on Smoke Alarms. Configuration parameter 3 and 4 will define when ON and when OFF is sent.
Configuration Parameters	Parameter Number Name Description Format Size Min Value Max Value Default Value Parameter Values 1 Siren alarm sequence interval The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the interval in seconds. 0 1 0 0 10 From To Description 0 0 6 129 seconds 3 Value of On-Command This value is sent as BASIC Set to Association Group 3 when an Smoke Alarm occurs. 0 1 0 0 99 From To 0 0 0 0 4 Value of Off-Command This value is sent as BASIC Set to Association Group 3 when an Smoke Alarm is cleared. 0 1 0 0 0 From To 0 0 0 0 2 Siren alarm tone length The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the sound versus silence within this interval. Please make sure this value is always smaller (shorter time) than parameter 1 that defines the whole sequence. 0 1 0 0 8 From To Description 0 0 1 99 seconds
Texts	ID Description Value 5 Factory Reset To reset the device keep the button pushed for 10 seconds. After 5 seconds the led starts flashing and after another 5 seconds there is a short beep signaling the successful reset back to factory defaults. Use this procedure only when the network primary controller is missing or otherwise inoperable. 2 Exclusion To exclude the device start the inclusion on your controller and then hit the little button on the wireless module for 1 second 1 Inclusion To include the device start the inclusion on your controller and then hit the little button on the wireless module for 1 second
Supports NWI	Yes
Supports Explorer Frames	Yes
Is Flirs	Yes